OptiPlex 3060 CRU(Customer Replaceable Unit) 분해 분리 가이드
Summary: 이 가이드는 OptiPlex 3060의 고객 교체 가능 장치를 제거하는 방법에 대한 지침을 제공합니다.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
이 가이드는 다양한 OptiPlex 3060 폼 팩터의 CRU(Customer Replaceable Unit) 부품을 안전하게 분리하는 과정을 단계별로 안내합니다. CRU는 엔지니어가 분리 또는 교체할 필요가 없는 시스템 부품입니다. 이 가이드에는 관련 내용을 참조할 수 있는 그림도 포함되어 있습니다.
목차:
Cause
해당 사항 없음
Resolution
분리 가이드 소개
이 가이드에서 원하는 작업을 다루지 않으면 시스템 설명서를 참조하십시오.
MT(Mini Tower) 섀시
SFF(Small Form Factor) 섀시
MFF(Micro Form Factor) 섀시
- OptiPlex 3060 MFF(Micro Form Factor) CRU(Customer Replaceable Unit) 분해 분리 가이드
- OptiPlex 마이크로 폼 팩터 마운팅 옵션 및 설치 방법
| 추가 지원이 필요하면 기술 지원에 문의하십시오. | ||
| 연락처 |
Affected Products
OptiPlex 3060 TowerArticle Properties
Article Number: 000146402
Article Type: Solution
Last Modified: 28 Jun 2023
Version: 7
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.