How to install or upgrade PowerPath/VE for VMware using live package in a Boot from SAN setup
Summary: How to install or upgrade PowerPath/VE using live package in a Boot from SAN setup.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
Note: Upgrading or Installing using Live package is only supported using Non-Disruptive Upgrade (NDU) or Non-Disruptive Install (NDI) from PowerPath Management Appliance (PPMA) on a Boot from SAN (BFS) setup.
Note: Reboot is required in NDI or NDU on a BFS setup.
See the Installation and Administration Guide of PowerPath/VE and PowerPath Management Appliance for more information.
Note: Reboot is required in NDI or NDU on a BFS setup.
See the Installation and Administration Guide of PowerPath/VE and PowerPath Management Appliance for more information.
Affected Products
PowerPath Management Appliance, PowerPath/VE for VMwareArticle Properties
Article Number: 000192922
Article Type: How To
Last Modified: 04 Jan 2022
Version: 2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.