PowerEdge: ESXi 7.0 부팅이 실패하고 모듈을 로드하는 동안 오류 6(버퍼가 너무 작음)이 발생함: state.tgz
Summary: 유지 보수를 위한 시스템의 갑작스러운 전원 장애로 인해 ESXi 7.0 부팅이 실패하고 모듈:/state.tgz를 로드하는 동안 오류 6(버퍼가 너무 작음)이 발생합니다.
Symptoms
1. ESXi 7.0 부팅이 실패하고 모듈을 로드하는 동안 오류 6(버퍼가 너무 작음)이 발생합니다./state.tgz.
2. 하드웨어 상태가 양호, 하드 드라이브 및 가상 디스크(VD) 상태가 양호한지 확인합니다. FC640
펌웨어
의 TSR에서 BIOS 2.11.2
, CPLD 1.0.1
iDRAC 및 LC 5.00.00.00
스토리지 컨트롤러
위치 공급업체 모델 속도 모드 펌웨어
내장형 1 Broadcom/LSI PERC H730P 미니 12Gbps RAID 25.5.8.0001
물리적 디스크
슬롯 RAID 상태 공급업체 모델 크기 직렬 펌웨어
Backplane 1 on Integrated RAID Controller 1
0 Online SKhynix HFS480G3H2X069N 479 GB BNA4N4759I2104I0T DZ00
1 Online SKhynix HFS480G3H2X069N 479 GB BNA4N4759I2104I0S DZ00
가상 디스크
인덱스 크기 수준 상태 구성원
Integrated RAID Controller 1
0 479 GB RAID 1 Online Disks 0 & 1 in Backplane 1 on Integrated RAID Controller 1
LC 로그:
2022-03-22 20:31:12 1670 SRV062 The SupportAssist Chassis Controller logs collection operation is successfully completed .
2022-03-22 20:30:59 1669 CTL129 The boot media of the Controller Integrated RAID Controller 1 is Disk.Virtual.0:RAID.Integrated.1-1.
2022-03-22 20:29:40 1668 IOID119 FlexAddress is enabled on all NIC and FC HBA devices.
2022-03-22 20:28:52 1667 SYS1003 System CPU Resetting.
2022-03-22 20:28:38 1666 SYS1000 System is turning on.
2022-03-22 20:28:31 1665 SYS1001 System is turning off.
2022-03-22 20:28:31 1664 SYS1003 System CPU Resetting.
2022-03-22 20:28:29 1663 UEFI0252 Unable to boot a boot option because the watchdog timer has expired. System will reset.
UEFI0252
Message:
Unable to boot a boot option because the watchdog timer has expired.System will reset.
세부 설명:
The watchdog timer is armed before the BIOS boot manager invokes an UEFI boot option. The watchdog is set to a period of 5 minutes. The Operating System boot loader from the boot option is required to disable the watchdog timer after it is successfully loaded, otherwise the system will reset if the timer expires.
권장 대응 조치:
부팅 옵션 이미지와 부팅 로더를 확인합니다. 가능하면 최신 버전으로 업데이트하십시오.
Cause
워치독 타이머가 만료되어 서버가 재설정되었습니다.
- BIOS 부팅 관리자가 UEFI 부팅 옵션을 호출하기 전에 Watchdog Timer가 준비됩니다.
- Watchdog의 기간은 5분으로 설정됩니다.
- 성공적으로 로드된 후 watchdog 타이머를 비활성화하려면 boot 옵션의 운영 체제 부트 로더가 필요합니다.
Resolution
1. 서버
재부팅2.하이퍼바이저 진행률 표시줄이 로드되기 시작하면, Shift+R을 누릅니다(이 작업은 막대가 로드되는 동안에 수행해야 하며, 이후에는 수행하지 않아야 합니다.
3. "서버가 부팅을 준비 중"일 때 Shift+R을 반복해서 눌러 명령 실행 시간을 놓치지 않도록 합니다.
다음과 같은 경고 메시지가 표시됩니다.
3.Y를 눌러 빌드를 롤백합니다.
4. Enter 키를 눌러 부팅합니다.
5. 서버가 재부팅되고 OS가 로드된 후