NetWorker: NWUI에 액세스할 수 없음 | 페이지를 찾을 수 없습니다.

액세스를 시도할 때 NWUI에 아래 오류가 발생합니다.

다음은 nwui.raw의 로그 메시지입니다.

127107 1694068051 1 5 0 822093632 1614 0 *****.backup.cba nwuictld NSR notice 16 Startup complete 0
127105 1695827017 2 5 0 822093632 1614 0 *****.backup.cba nwuictld NSR warning 62 Stop command for daemon %s failed, sending TERM signal instead 1 20 44 /nsr/nwui/monitoring/app/bin/nwui_monitoring
0 1695827017 1 5 0 660702976 1614 0 *****.backup.cba nwuictld NSR notice 6 %s: %s 2 0 15 nwui_monitoring 0 44 ERROR:Unable to get nwui install directory.
0 1695827017 1 5 0 660702976 1614 0 *****.backup.cba nwuictld NSR notice 6 %s: %s 2 0 6 nwuidb 0 38 Stopping NWUI Database (Postgres DB):
0 1695827017 1 5 0 660702976 1614 0 *****.backup.cba nwuictld NSR notice 6 %s: %s 2 0 6 nwuidb 0 35 ERROR: Postgres DB is not running!
127109 1695827020 1 5 0 822093632 1614 0 *****.backup.cba nwuictld NSR notice 17 Shutdown complete 0

가능한 원인:

NWUI 서비스가 작동하지 않을 수 있습니다.
NWUI 데이터베이스(Postgres DB)가 실행되고 있지 않을 수 있습니다.

아래 명령을 실행하여 NWUI 서비스가 실행 중인지 확인합니다.

Linux의 경우:
ps -ef | grep nwui

Windows:
tasklist | findstr nwui

Linux:

실행해야 함 nwui_configure.sh (스크립트)에서 /opt/nwui/scripts
문제가 지속되면 NWUI를 다시 설치하고 다음을 실행합니다. nwui_configure.sh (스크립트)

NWUI 재설치:

제거:

[root@***** linux_x86_64]# rpm -evh lgtonwuiserv-19.8.0.4-1.x86_64
Preparing...                          ################################# [100%]
NOTE: NetWorker Web UI Server is uninstalled successfully.
Cleaning up / removing...
  1:lgtonwuiserv-19.8.0.4-1          ################################# [100%]

설치:

[root@***** linux_x86_64]# rpm -ivh lgtonwuiserv-19.8.0.4-1.x86_64.rpm
warning: lgtonwuiserv-19.8.0.4-1.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID ff48d101: NOKEY
Preparing...                          ################################# [100%]
Updating / installing...
  1:lgtonwuiserv-19.8.0.4-1          ################################# [100%]

nwui_configure.sh 실행(스크립트):

[root@***** linux_x86_64]# /opt/nwui/scripts/nwui_configure.sh
Specify the directory where the Java Standard Edition Runtime Environment (JRE) software is installed [/usr/java/latest]:
Specify the host name of the NetWorker Authentication Service host [*****]:
Specify the host name of the NetWorker Server to be Managed by NWUI [*****]:
Specify the AUTHC port for Networker Server which is managed by NWUI [9090]:
The NetWorker Web UI Server requires a keystore file to configure encryption and to provide SSL support.
EMC recommends that you specify a password that has a minimum of nine characters,
with at least one upper case letter, one lower case letter, one number and one special character.
Do you want to use the existing keystore /nsr/nwui/monitoring/app/conf/nwui.keystore [y]?
Specify password for the existing keystore:ERROR: Keystore password cannot be empty
Specify password for the existing keystore:ERROR: Keystore password cannot be empty
Specify password for the existing keystore:ERROR: Keystore password cannot be empty
Specify password for the existing keystore:
The install will use the existing certificate "emcnwuimonitoring" for nwui services.
A database already exists in /nsr/nwui/monitoring/nwuidb, do you want to retain this database [y]?
The installation completed successfully

Windows:

NWUI 재설치

NWUI를 제거하려면 다음을 수행합니다.
제어판 - NetWorker - 변경 - NWUI 지우기 - 변경을 선택합니다.

NWUI를 설치하려면 다음을 수행합니다.
제어판 - NetWorker - 변경 - NWUI 확인 - 변경을 선택합니다.