Dell Unity: What is the SP CPU Utilization Threshold for Starting an OE Upgrade (User Correctable)
概要: Prior to the OE Upgrade (NDU), you may receive a warning during the Pre-Upgrade Health Check (PUHC) if the combined SP Utilization is 120+%. Normal SP Utilization is considered between 50-70% per the Unity Best Practices Guide; it is then logical to think that a normal combined SP Utilization would actually be between 100-140%. ...
この記事は次に適用されます：
この記事は次には適用されません：
この記事は、特定の製品に関連付けられていません。
すべての製品パージョンがこの記事に記載されているわけではありません。
手順
If there are no current performance issues (outside the SP Utilization value), there is likely no need to dive further into this issue. However, there are things the customer can do to decrease the SP Utilization before the OE Upgrade (ex. pause replication, decrease workload, schedule the upgrade off hours and/or during a maintenance window, so on).
The PUHC alert regarding high SP Utilization is a warning, not a hard coded error. This alerts purpose is to notify the end user of a potential performance impact during the OE Upgrade/NDU process. If the PUHC is ran again (immediately after), then the PUHC will pass this check.
The PUHC alert regarding high SP Utilization is a warning, not a hard coded error. This alerts purpose is to notify the end user of a potential performance impact during the OE Upgrade/NDU process. If the PUHC is ran again (immediately after), then the PUHC will pass this check.
対象製品
Dell EMC Unity Family製品
Dell Unity 300, Dell EMC Unity 300F, Dell EMC Unity 350F, Dell EMC Unity 400, Dell EMC Unity 400F, Dell EMC Unity 450F, Dell EMC Unity 550F, Dell EMC Unity 600, Dell EMC Unity 600F, Dell EMC Unity 650F, Dell EMC Unity Family |Dell EMC Unity All Flash
, Dell EMC Unity Family
...
文書のプロパティ
文書番号: 000019075
文書の種類: How To
最終更新: 28 2月 2023
バージョン: 3
質問に対する他のDellユーザーからの回答を見つける
サポート サービス
お使いのデバイスがサポート サービスの対象かどうかを確認してください。