Deregister Microsoft Autopilot Before Repairing the Motherboard or Replacing the System
概要: The following article provides information about the deregistration of Microsoft Autopilot enrolled Personal Computers that require a motherboard rework or system exchange.
この記事は次に適用されます：
この記事は次には適用されません：
この記事は、特定の製品に関連付けられていません。
すべての製品パージョンがこの記事に記載されているわけではありません。
現象
Failure to deregister Autopilot systems before service or exchange.
If you register your system using Windows Autopilot Deployment, and the system needs the motherboard replaced or the system must be exchanged for a replacement system, then the system must be deregistered from Autopilot before the service or exchange going ahead.
原因
Failure to deregister causes you further problems on the repaired/new system, as currently, the registration follows the motherboard unless it is deregistered. Once the repair or replacement is complete, your Autopilot registration can be reset.
Note: Only the person/company that registered the device can deregister it.
解決方法
System deregistration
If your Microsoft Autopilot registered system is currently waiting for work to be carried out to its motherboard or you are waiting on a replacement system, then you can get instructions from the following Microsoft document on how to ensure that your system is deregistered from Autopilot first:
対象製品
G Series, Alienware, Inspiron, Latitude, Vostro, XPS, Fixed Workstations, Mobile Workstations文書のプロパティ
文書番号: 000133098
文書の種類: Solution
最終更新: 16 7月 2025
バージョン: 8
質問に対する他のDellユーザーからの回答を見つける
サポート サービス
お使いのデバイスがサポート サービスの対象かどうかを確認してください。