Dell Command PowerShell Provider Advanced Battery Charge feature

概要: Learn how to Deploy, Manage, Secure and Virtualize BYOD, Enterprise Client, and Mobility Solutions from Experts and Peers.

この記事は次に適用されます： この記事は次には適用されません： この記事は、特定の製品に関連付けられていません。 すべての製品パージョンがこの記事に記載されているわけではありません。
他のリソースを確認する

現象

Affected Products:

  • Dell Command | PowerShell Provider

原因

Not Applicable

解決方法

Advanced Battery charge maximizes battery health while still supporting heavy use during the workday. Essentially what the advanced battery charge feature does, ExpressCharge is used for accelerated battery charging from Beginning of Day and lasting for Work Period. At all other times, Standard Charge is used for maximum battery health. BIOS presents this feature.

It is clear that the user is provided fields Beginning Of Day and Work Period for each day of the week and there is a checkbox for Enabling/Disabling this feature for all the days of the week. The user can set the time and set a work duration during which ExpressCharge would be used.

Dell Command | PowerShell Provider (DCPP) has strived hard to adhere to provide this feature as close to the F2 screen as possible. DCPP provides two attributes through which the user can get and set advanced battery charge namely AdvancedBatteryChargeCfg and AdvancedBatteryChargeConfiguration. This is shown below:
Advanced Battery Charge Configuration

AdvancedBatteryChargeCfg is a simple enumerated attribute which takes only the values Enabled and Disabled to respectively enable or disable the advanced battery charging feature. An example to set this attribute is shown below:
SLN312121_en_US__2i_11728_img2_DS-v1

AdvancedBatteryChargeConfiguration is a more complex attribute which provides an interface to the user similar to BIOS through which the user can get and set advanced battery charge data.

Dir AdvancedBatteryChargeConfiguration|select – ExpandProperty CurrentValue

To set data for a specified day of the week:

Set-item AdvancedBatteryChargeConfiguration Sunday – BeginningOfDay "13:45" –WorkPeriod "1:30"

The user has set advanced battery charge data for Sunday with the beginning of the day as "13:45" and work duration as "1:30."

Note:
  • The validation that minutes have to be in multiples of fifteen (for example, zero, fifteen, thirty, and forty-five).
  • If either system or admin password is set, then it has to be provided with a –Password switch.
  • An example is: 
    Set-item AdvancedBatteryChargeConfiguration Sunday – BeginningOfDay "13:45" –WorkPeriod "1:30" –Password mySysPassword

その他の情報

Related Articles:

対象製品

Dell Command | Powershell Provider
文書のプロパティ
文書番号: 000146339
文書の種類: Solution
最終更新: 24 10月 2025
バージョン:  7
質問に対する他のDellユーザーからの回答を見つける
サポート サービス
お使いのデバイスがサポート サービスの対象かどうかを確認してください。