Hopp til hovedinnhold
  • Legg inn bestillinger raskt og enkelt
  • Vis bestillinger og spor forsendelsesstatus
  • Opprett og få tilgang til en liste over produktene dine
  • Administrer Dell EMC-områder, produkter og kontakter for produktnivå ved hjelp av virksomhetsadministrering.
Det kan hende at noen artikkelnumre er endret. Hvis dette ikke er det du ser etter, kan du prøve å søke i alle artikler. Søk i artikler

027-446 IPv6 027-452 IPv4 Duplicate Errors on the C3760n C3760dn C3765dnf Dell Color Laser Printers

Sammendrag: This article goes over troubleshooting C3760n, C3760dn, and C3765dnf printers displaying IPv6 and iPv4 duplicate errors.

Det kan hende at denne artikkelen er oversatt automatisk. Hvis du har tilbakemeldinger angående kvaliteten, kan du gi oss beskjed ved hjelp av skjemaet nederst på denne siden.

Artikkelinnhold


Symptomer

027-446 IPv6 or 027-452 IPv4 Duplicate Error is displayed on the printer.

Årsak

No Cause information.

Oppløsning

  1. Turn the printer off for at least 60 seconds and power back on.

    If that did not resolve the error message go to the next steps.

  2. Check the cable between the Printer and network.
    • Check that the Ethernet cable meets the required specifications.
    • The Ethernet cable should be 10Base-T / 100Base-TX / 1000Base-T.
    • More information about your specific printer model is located in the Dell User Guides / Manuals.

    If that did not resolve the error message go to the next steps.

  3. Check the network connection.
    • Unplug and plug in the Ethernet cable.
    • Turn the printer off for at least 60 seconds and power back on.

    If that did not resolve the error message go to the next steps.

  4. Initialize the network settings and configure the network settings again.
    • Turn the printer off for at least 60 seconds and power back on.

    If that did not resolve the error message go to the next steps.

  5. Download the latest firmware following this instructions Dell Printer Uninstalling, Downloading and Installing Printer Drivers, Software, Manuals and Firmware.

    If that did not resolve the error message go to the next steps.

  6. Replace the Ethernet cable.

Artikkelegenskaper


Dato for siste publisering

27 aug. 2021

Versjon

4

Artikkeltype

Solution