PowerProtect: Discovery Fails for DD System, Error ADS0005, Authentication Token Empty

Summary: This article provides guidance for resolving the ADS0005 error encountered during the discovery of a PowerProtect Data Domain (DD) system in PowerProtect Data Manager. A misconfigured login session limit on the DD system causes the error by preventing the generation of a valid authentication token. ...

Acest articol se aplică pentru Acest articol nu se aplică pentru Acest articol nu este legat de un produs specific. Acest articol nu acoperă toate versiunile de produs existente.

Symptoms

During the discovery of a PowerProtect DD system in PowerProtect Data Manager, the following error is displayed:

ADS0005
Unable to discover protection storage PowerProtect DD System with address <n.n.n.n> because of com.emc.brs.common.resource.ResourceException: 
Error while executing /rest/v1.0/systemcode: 5468 statusCode: 400 Error: **** Authentication token is empty..

Cause

The error occurs when the login-max-active option on the Data Domain system is set too low, preventing PowerProtect Data Manager from establishing a valid session and retrieving the required authentication token.

To verify the current setting, run:

# adminaccess option show login-max-active

Resolution

To address the issue:

  1. Log in to the Data Domain system using CLI.
  2. Increase the maximum number of active login sessions by running:
# adminaccess option set login-max-active 100
  1. Retry the discovery operation from the PowerProtect Data Manager user interface.

This change sets the login-max-active value to its default, allowing PowerProtect Data Manager to successfully authenticate and complete the discovery process.

Produse afectate

PowerProtect Data Manager
Proprietăți articol
Article Number: 000356281
Article Type: Solution
Ultima modificare: 21 Nov 2025
Version:  2
Găsiți răspunsuri la întrebările dvs. de la alți utilizatori Dell
Servicii de asistență
Verificați dacă dispozitivul dvs. este acoperit de serviciile de asistență.