PowerStore: Upgrading from PowerStoreOS 3.0/3.2 to 4.0.0.x may fail and roll back if new SCSI reservations occur during the process
摘要: Upgrading from PowerStoreOS 3.0.x or 3.2.x directly to 4.0.0.x may fail and roll back if there are new SCSI reservation requests during the upgrade progress.
本文适用于
本文不适用于
本文并非针对某种特定的产品。
本文并非包含所有产品版本。
症状
The following PowerStoreOS software versions may be exposed to this issue:
The following changes to a PowerStore environment may expose this issue:
The following host mechanism may contribute to exposing this issue:
- PowerStoreOS 3.0.x
- PowerStoreOS 3.2.x
The following changes to a PowerStore environment may expose this issue:
- Direct software upgrade from PowerStoreOS 3.0.x to PowerStoreOS 4.0.0.x
- Direct software upgrade from PowerStoreOS 3.2.x to PowerStoreOS 4.0.0.x
The following host mechanism may contribute to exposing this issue:
- Use of SCSI reservations to control access to volumes. SCSI reservations are seen in clustered host environments, hosts configured for high availability, virtualized environments, and when using backup/restore based applications.
原因
SCSI reservation requests sent to a PowerStore appliance during a software upgrade may not be processed correctly.
In rare scenarios, internal services may be impacted for a brief period of time.
In rare scenarios, internal services may be impacted for a brief period of time.
解决方案
This issue is fixed in PowerStoreOS 4.0.1.0 (and greater).
This issue is not encountered when performing a direct upgrade from PowerStoreOS 3.0.x or PowerStoreOS 3.2.x to PowerStoreOS 4.0.1.0 (and greater).
See the PowerStoreOS Matrix for the latest PowerStoreOS software offerings.
受影响的产品
PowerStore, PowerStore 1000T, PowerStore 1200T, PowerStore 3000T, PowerStore 3200T, PowerStore 5000T, PowerStore 500T, PowerStore 5200T, PowerStore 7000T, PowerStore 9000T产品
PowerStore 9200T, PowerStoreOS文章属性
文章编号: 000228564
文章类型: Solution
上次修改时间: 14 2月 2025
版本: 3
从其他戴尔用户那里查找问题的答案
支持服务
检查您的设备是否在支持服务涵盖的范围内。