Dell PowerEdge R730 Owner's Manual

Installing the PCIe card holder

Prerequisites

Follow the safety guidelines listed in the Safety instructions section.
Follow the procedure listed in the Before working inside your system section.

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.

CAUTION: Do not use your system without the PCIe card holder installed. The PCIe card holder is necessary to ensure proper system cooling.

Steps

Align the PCIe card holder with the notches and tabs on the power supply unit cage.
Press the release tab and slide the PCIe card holder toward the front of the chassis until firmly seated.
Figure 1. Installing the PCIe card holder
1. PCIe card holder
2. release tab

Next steps

If applicable, replace the full-length PCIe card.
Follow the procedure listed in the After working inside your system section.

Vítáme vás.

Vítejte ve společnosti Dell.

Installing the PCIe card holder

Prerequisites

Steps

Next steps

Hodnoťte tento obsah