The LCD panel
of your system provides system information, status, and error messages
to indicate if the system is functioning correctly or if the system
needs attention. For more information about error messages, see the Dell Event and Error Messages Reference Guide at Dell.com/openmanagemanuals >OpenManage software.
The LCD backlight turns blue during normal operating
conditions.
When the system needs attention, the LCD turns amber,
and displays an error code followed by descriptive text.
NOTE: If the system is connected
to a power source and an error is detected, the LCD turns amber regardless
of whether the system is turned on or off.
The LCD backlight is turned off when the system is
in standby mode and can be turned on by pressing either the Select,
Left, or Right button on the LCD panel.
The LCD backlight remains off if LCD messaging is
turned off using the iDRAC utility, the LCD panel, or other tools.
Figure 1. LCD panel features
Table 1. LCD panel featuresThe LCD Panel features table describes the LCD panel
buttons: Left, Select and Right, and their functions.
Item
Button
Description
1
Left
Moves the cursor back in one-step increments.
2
Select
Selects the menu item highlighted by the cursor.
3
Right
Moves the cursor forward in one-step increments.
During message scrolling:
Press and hold the button to increase scrolling speed.
Release the button to stop.
NOTE: The display
stops scrolling when the button is released. After 45 seconds of inactivity,
the display starts scrolling.
Pro téma nejsou k dispozici data
Zadejte hodnocení (1 až 5 hvězdiček).
Zadejte hodnocení (1 až 5 hvězdiček).
Zadejte hodnocení (1 až 5 hvězdiček).
Vyberte, zda vám článek pomohl či nikoli.
Komentáře nesmí obsahovat tyto speciální znaky: <>() \
