Dell SmartFabric Services User Guide Release 10.5.3

1. Click Global Settings > Fabric Settings.
2. Click Edit.
3. Change the following values of the default settings as required:
   • Domain ID
   • Leaf and spine ASN
   • Fabric BGP subnet and mask
   • Fabric VTEP subnet and mask
   • Client control VLAN
   • Client management VLAN
   • STP mode between MST and Rapid PVST
   • VxRail Manager Integration
4. Click Submit. The changed settings are applied only after a reboot. The system prompts for confirmation to continue. After you click Ok, all the switches in the network fabric reload to apply the changes.

When you edit the domain ID:

1. The fabric settings, multisite fabric interconnect configuration, and fabric name are changed after reload.
2. The interface breakout, networks, server profiles, and uplink configurations and its association are retained after reload.
3. You must reconfigure BGP policy details for the external peer connectivity configurations such as multisite fabric interconnect links, external router, NSX-T based on the changed ASN.

To manually onboard the VxRail node onto the fabric:

1. Click Global Settings > Fabric Settings.
2. Click Edit.
3. Select Disable for VxRail Manager Integration.
4. Click Ok.
   NOTE The VxRail Manager Integration setting change does not reload the switches, and the change is applied to the latest selection immediately.

After disabling the VxRail Manager Integration, you can onboard the VxRail server to the fabric manually. If you want to dynamically onboard the new VxRail nodes, you can enable the VxRail Manager Integration option.