Displays all the information about the upgrade status.
Syntax
show smartfabric upgrade-status
NOTE This command is accessible to users with
sysadmin,
secadmin, or
netadmin roles.
Parameters
None
Default
Not applicable
Command Mode
EXEC
Usage Information
You can run this command on all the switches in the fabric. The output remains the same on all the switches.
Example
MX9116N-A1# show smartfabric upgrade-status
Opaque-id : ea89b7c4-de00-4fc9-ad54-9ed5bf61e300
Upgrade Protocol : PUSH
Upgrade start time : 2021-02-12 01:51:29.261000
Status : SUCCESS
Nodes to Upgrade : SVC009F, SVC009A, 7H92Q03, SVC009C, 8PQXV23, 34HQXC2,
8PTXV23, D6RRNK2, BWGQXC2, 9KK1W23, 9J45W23, 8Q52W23
Reboot Sequence : 7H92Q03,SVC009C,9KK1W23,SVC009F,8Q52W23,8PTXV23,D6RRNK2,
BWGQXC2,SVC009A,34HQXC2,5WQQXC2,9J45W23,8PQXV23
Node Current Curent Status-Message
-Action -Status
---------------------------------------------------------------------------------
SVC009C DOWNLOAD SUCCESS Skipping ONIE update for the node SVC009C since
ONIE is already installed with latest firmware.
SVC009F DOWNLOAD SUCCESS Skipping ONIE update for the node SVC009F since
ONIE is already installed with latest firmware.
SVC009A DOWNLOAD SUCCESS Skipping ONIE update for the node SVC009A since
ONIE is already installed with latest firmware.
8Q52W23 DOWNLOAD SUCCESS Skipping ONIE update for the node 8Q52W23 since
ONIE is already installed with latest firmware.
34HQXC2 DOWNLOAD SUCCESS Skipping ONIE update for the node 34HQXC2 since
ONIE is already installed with latest firmware.
BWGQXC2 DOWNLOAD SUCCESS Skipping ONIE update for the node BWGQXC2 since
ONIE is already installed with latest firmware.
9J45W23 DOWNLOAD SUCCESS Skipping ONIE update for the node 9J45W23 since
ONIE is already installed with latest firmware.
7H92Q03 DOWNLOAD SUCCESS Skipping ONIE update for the node 7H92Q03 since
ONIE is already installed with latest firmware.
9KK1W23 DOWNLOAD SUCCESS Skipping ONIE update for the node 9KK1W23 since
ONIE is already installed with latest firmware.
8PQXV23 DOWNLOAD SUCCESS Skipping ONIE update for the node 8PQXV23 since
ONIE is already installed with latest firmware.
D6RRNK2 ONIE-INSTALL SUCCESS [Action: REBOOT] Successfully rebooted.
8PTXV23 DOWNLOAD SUCCESS Skipping ONIE update for the node 8PTXV23 since
ONIE is already installed with latest firmware.
Supported Releases
10.5.2.4 or Later
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\