Displays important logs that are related to SFS modules.
NOTE You must have access to
sysadmin,
secadmin, or
netadmin roles to run this command.
Syntax
show logging smartfabric
Parameters
<1-65535>—Number of recent messages to be displayed.
Default
Not applicable
Command Mode
EXEC
Usage Information
You can run this command on all switches in SmartFabric mode and are provided with a high-level view of the events happening in the SFS module. When you run this command on an active switch, the system displays complete cluster-related logs. The logs include events that are related to cluster formation and update, configuration changes, and on boarding events along with switch-specific information. When you run this command on a backup switch, the system displays only the switch-specific logs.
Example
MX9116N-B2# show logging smartfabric 100 | grep CAGT
2020-03-29 10:09:35.334 MX9116N-B2 [DNV-CAGT] [chassis.get_lead_chassis] lead chassis not in chassis_data
2020-03-29 10:09:35.335 MX9116N-B2 [DNV-CAGT] [chassis.get_lead_chassis] not receive mdns from lead MSM yet
2020-03-29 10:09:56.881 MX9116N-B2 [DNV-CAGT] [app.process_cps_cluster_sync_event] received sync state 2
2020-03-29 10:09:56.881 MX9116N-B2 [DNV-CAGT] [ka.clr_priority]
2020-03-29 10:09:56.885 MX9116N-B2 [DNV-CAGT] [ka.set_priority] new 100 old 0
2020-03-29 10:09:58.014 MX9116N-B2 [DNV-CAGT] [ka.soft_reload_ka] reloading ka...
Supported Releases
10.5.2.3 or later
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\