Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Dell SmartFabric Services User Guide Release 10.5.3

PDF

show smartfabric validation-errors

Displays validation-error information of the topology. Information includes error category, subcategory, description, recommended action, severity, timestamp, EEMI, problem, and recommendation for each error.

Syntax
show smartfabric validation-errors
Parameters
None
Default
None
Command Mode
EXEC
Usage Information
Use this command to view a list of topology validation errors with detailed description about each error. This command can be run on any IOM deployed in the same cluster.

This command is supported both in Full Switch and SmartFabric modes.

Example 
OS10# show smartfabric validation-errors
----------------------------------------------------------
ErrorKey         : d77d0133-f8c8-4cd7-82b5-83266e5361eb-ISL-
[ICL-3_REVERSE]-NotFound-Issue
MessageID        :
Description      : Unable to validate the SmartFabric because 
the VLTi cable for link ICL-3_REVERSE is not connected as per 
fabric design 2xMX9116n_Fabric_Switching_Engines_in_same_chassis.
EEMI             : NFAB0012
Category         : FABRIC_ERROR
Subcategory      : ISL_ERROR
Severity         : SEVERITY_1
Recommended Action:Make sure that the VLTi cables are connected
to the correct ports as per the selected fabric design.
Timestamp        : 1587488570
Problem Link
    SourceNode          :HRA0028
    SourceInterface     :HRA0028:ethernet1/1/38
    DestinatioNode      :HRA0027
    DestinationInterface:
Recommended Link
    SourceNode          :HRA0028
    SourceInterface     :HRA0028:ethernet1/1/38
    DestinatioNode      :HRA0027
    DestinationInterface:HRA0027:ethernet1/1/38
----------------------------------------------------------            

----------------------------------------------------------
ErrorKey         : 8ca24343-c819-4d0b-ab12-2b9d99a36079-ISL-
[ICL-2_REVERSE]-NotFound-Issue
MessageID        :
Description      : Unable to validate the SmartFabric because 
the VLTi cable for link ICL-2_REVERSE is not connected as per 
fabric design 2xMX5108n_Ethernet_Switches_in_same_chassis.
EEMI             : NFAB0012
Category         : FABRIC_ERROR
Subcategory      : ISL_ERROR
Severity         : SEVERITY_1
Recommended Action:Make sure that the VLTi cables are connected
to the correct ports as per the selected fabric design.
Timestamp        : 1587490907
Problem Link
    SourceNode          :HRA0038
    SourceInterface     :HRA0038:ethernet1/1/9
    DestinatioNode      :HRA0037
    DestinationInterface:
Recommended Link
    SourceNode          :HRA0038
    SourceInterface     :HRA0038:ethernet1/1/9
    DestinatioNode      :HRA0037
    DestinationInterface:HRA0037:ethernet1/1/9
----------------------------------------------------------
Supported Releases
  • MX9116n and MX5108n—10.5.0.1 or later
  • SFS-supported OS10 switches—10.5.0.3 or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\