Installing the M.2 2230 solid-state drive
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
NOTE:This laptop support M.2 2230 solid-state drive or M.2 2280 solid-state drive in both SSD slots.
NOTE:Install the solid-state drive mounting bracket, if it is not installed.
The following image indicates the location of the M.2 2230 solid-state drive and provides a visual representation of the installation procedure.
Steps
- Align the notch on the solid-state drive with the tab on the solid-state drive slot.
- Slide the solid-state drive into the solid-state drive slot.
- Using the alignment post, place the solid-state drive thermal bracket over the solid-state drive.
- Align the screw hole on the solid-state drive thermal bracket with the screw hole on the system board.
- Replace the screw (M2x4) that secures the solid-state drive thermal bracket and the solid-state drive to the system board.
Data is not available for the Topic