Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Aurora R7 Service Manual

PDF

Procedure

  1. Remove the screws that secure the radiator and fan assembly to the radiator and fan cage.
    Figure 1. Removing the processor-cooling assembly Image: Removing the processor-cooling assembly
    1. screws (4)
    2. radiator and fan cage
  2. Follow the procedure from step 1 to step 4 in " Removing the power-supply unit".
  3. Loosen the captive screws that secure the VR heat sink to the system board.
  4. Lift the VR heat sink off the computer.
    Figure 2. Removing the VR heat sink Image: Removing the VR heat sink
    1. captive screws (2)
    2. VR heat sink
  5. Disconnect the processor-cooling assembly cables from the system board.
  6. In reversed order (as indicated on the processor cooler), loosen the captive screws that secure the processor cooler to the system board.
    • NOTE: If your are using an electric screwdriver, torque the screws at 6.9 +/-1.15 kilogram-force centimeter (6 +/-1 pound force inch).
  7. Lift the processor-cooling assembly along with the cables off the computer.
    Figure 3. Removing the processor-cooling assembly Image: Removing the processor-cooling assembly
    1. radiator fan
    2. radiator-fan cable
    3. system board
    4. processor-cooling assembly cable
    5. captive screws (4)

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\