Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Aurora R7 Service Manual

PDF

Procedure

  1. Place the power supply on the chassis.
  2. Align the screw holes on the power-supply unit with the screw holes on the chassis.
  3. Replace the screws that secure the power-supply unit to the chassis.
  4. Align the screw holes on the power-supply unit bracket with the screw holes on the power-supply unit cage.
  5. Replace the screws that secure the power-supply unit bracket to the power-supply unit cage.
  6. Slide the power supply unit release latches towards the unlock position.
  7. Lift and rotate the power-supply unit cage away from the chassis while pressing and holding the graphics-card bracket.
  8. Connect the power cables to the graphics card, hard drives, and optical drive.
  9. Connect the processor-power cable and system-board power cable to the system board.
  10. Rotate the power-supply unit cage towards the chassis until the unit snaps into place.
  11. Slide the power supply unit cage release latches towards the locked position.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\