- Notes, cautions, and warnings
- Overview
- System views
- Setting up your Dell Edge Gateway
- Setting up your
operating system
- Windows 10 LTSB 2015
- Snappy Ubuntu
Core 15 and 16
- Overview
- Boot up and log in
- Restoring Ubuntu Snappy
- Updating operating system and applications
- Ubuntu core OS basic function
- UEFI capsule update
- Watchdog Timer
- Trusted Platform Module
- Snappy Auto update
- Cloud LED On/Off
- Serial Port
- Expansion IO Module
- Zigbee
- Controller Area Network
- Network Manager – Ubuntu Core 15
- Network Manager – Ubuntu Core 16
- Flashing a new OS Image
- Flashing the BIOS
- Wind River Linux
- System specifications
- I/O Module Overview
- Power Module Overview
- Enclosure Overview
- Setting up the ZigBee dongle
- BIOS defaults
- Other documents you may need
- Contacting Dell
Dell Edge Gateway5000 Series Installation and Operation Manual
Expansion IO Module
PCIe
The PCIe slot on the external IO Module for the Edge Gateway is driven directly from the host PCIe bus. Since it is generic PCIe expansion, there are no PCIe device-specific drivers integrated into the OS image. If there is specific PCIe card used on this slot, contact the Vendor of that PCIe card for drivers.GPIO
The GPIOs on the external IO Module for the Edge Gateway are behind PIC microcontroller. The PIC microcontroller is exposed to the host system and to the host OS as a USB-HID device. Software application developed to communicate with the GPIOs may use the protocol defined in following set of references to communicate with the GPIO modules. There is no native application software available on the factory OS image that communicates with the IO Module GPIOs. Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\