Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell Edge Gateway5000 Series Installation and Operation Manual

PDF

Flashing the BIOS

Prerequisites
  • BIOS file. Download the file from www.dell.com/support.
  • USB 2.0 or USB 3.0 flash drive (4GB min)
  • Turn off the Edge Gateway has been turned off.
  1. On a separate computer, unzip the BIOS update file that you downloaded from www.dell.com/support.
  2. Open the extracted file folder Edge_Gateway5000_1.X.X.
  3. Copy the BIOS update file, it is labeled Edge_Gateway5000_1.X.X.exe, to a USB flash drive.
  4. Insert the USB flash drive in one of the available USB ports on the Edge Gateway.
  5. Power on the Edge Gateway.
  6. Press F12 when the Dell logo is displayed on the screen to enter the One-time boot screen.
  7. On the One-time boot screen, choose Flash the BIOS .
  8. On the next screen, select the BIOS file ( Edge_Gateway5000_1.X.X.exe) on the USB key.
  9. Start the Flash process.


Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\