Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

neighbor weight

Assign a weight to the neighbor connection, which is used to determine the best path.

Syntax

neighbor { ipv6-address | peer-group-name} weight weight

To remove a weight value, use the no neighbor { ipv6-address | peer-group-name} weight weight command.

Parameters

ipv6-address	Enter the IPv6 address in the x:x:x:x::x format. NOTE: The :: notation specifies successive hexadecimal fields of zeros.
peer-group-name	Enter the name of the peer group to set the timers for all routers within the peer group.
weight	Enter a number as the weight. The range is from 0 to 65535. The default is 0.

Defaults

0

Command Modes

ROUTER BGP

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

In the system best path selection process, the path with the highest weight value is preferred.

NOTE: To apply the weight to the connection and recompute the best path, reset the neighbor connection (the capture bgp-pdu max-buffer-size * command).