Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

radius-server retransmit

Configure the number of times the switch attempts to connect with the configured RADIUS host server before declaring the RADIUS host server unreachable.

Syntax

radius-server retransmit retries

To configure zero retransmit attempts, use the no radius-server retransmit command.

To return to the default setting, use the radius-server retransmit 3 command.

Parameters

retries

Enter a number of attempts that Dell Networking Operating System (OS) tries to locate a RADIUS server. The range is from zero (0) to 100. The default is 3 retries.

Defaults

3 retries

Command Modes

CONFIGURATION

Supported Modes

All Modes

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.
9.3(0.0)	Supported on the M I/O Aggregator.

Related Commands

radius-server host — configures a RADIUS host.