Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show ip pim tib

View the PIM tree information base (TIB).

Syntax show ip pim tib [ group-address [ source-address]]
Parameters
group-address (OPTIONAL) Enter the group address in dotted decimal format (A.B.C.D).
source-address (OPTIONAL) Enter the source address in dotted decimal format (A.B.C.D).
Command Modes
  • EXEC
  • EXEC Privilege
Supported Modes Full—Swtich
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information The following describes the show ip pim tib command shown in the following example.
Field Description
(S, G) Displays the entry in the multicast PIM database.
uptime Displays the amount of time the entry has been in the PIM route table.
expires Displays the amount of time until the entry expires and is removed from the database.
RP Displays the IP address of the RP/source for this entry.
flags List the flags to define the entries:
  • D = PIM Dense Mode
  • S = PIM Sparse Mode
  • C = directly connected
  • L = local to the multicast group
  • P = route was pruned
  • R = the forwarding entry is pointing toward the RP
  • F = Dell Networking OS is registering this entry for a multicast source
  • T = packets were received via Shortest Tree Path
  • J = first packet from the last hop router is received and the entry is ready to switch to SPT
  • K = acknowledge pending state
Incoming interface Displays the reverse path forwarding (RPF) interface towards the RP/ source.
RPF neighbor Displays the next hop from this interface towards the RP/source.
Outgoing interface list: Lists the interfaces that meet one of the following criteria:
  • a directly connect member of the Group
  • statically configured member of the Group
  • received a (*,G) Join message
Example 
Dell#show ip pim tib
                                             
                                             PIM Multicast Routing Table
                                             Flags:D- Dense, S- Sparse, C- Connected, L- Local, P- Pruned,
                                             R- RP-bit set, F- Register flag, T- SPT-bit set, J- Join SPT,
                                             M- MSDP created entry, A- Candidate for MSDP Advertisement,
                                             K- Ack-Pending State
                                             Timers: Uptime/Expires
                                             Interface state: Interface, next-Hop, State/Mode
                                             
                                             (*, 226.1.1.1), uptime 01:29:19, expires 00:00:52, RP 10.211.2.1, flags: SCJ
                                             Incoming interface: TenGigabitEthernet 0/2, RPF neighbor 10.211.1.2
                                             Outgoing interface list:
                                             TenGigabitEthernet 0/8
                                             
                                             (*, 226.1.1.2), uptime 00:18:08, expires 00:00:52, RP 10.211.2.1, flags: SCJ
                                             Incoming interface: TenGigabitEthernet 1/2, RPF neighbor 10.211.1.2
                                             Outgoing interface list:
                                             TenGigabitEthernet 0/8
                                             
                                             (*, 226.1.1.3), uptime 00:18:08, expires 00:00:52, RP 10.211.2.1, flags: SCJ
                                             Incoming interface: TenGigabitEthernet 1/2, RPF neighbor 10.211.1.2
                                             Outgoing interface list:
                                             TenGigabitEthernet 0/8
                                             
                                             (*, 226.1.1.4), uptime 00:18:08, expires 00:00:52, RP 10.211.2.1, flags: SCJ
                                             Incoming interface: TenGigabitEthernet 1/2, RPF neighbor 10.211.1.2
                                             Outgoing interface list:
                                             TenGigabitEthernet 0/8

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\