Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show ip ospf database router

Display the router (type 1) LSA information.

Syntax

show ip ospf process-id database router [ link-state-id] [adv-router ip-address]

Parameters

process-id	Enter the OSPF Process ID to show a specific process. If you do not enter a process ID, the command applies only to the first OSPF process.
link-state-id	(OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID value depends on the LSA type, and it can be one of the following: the network’s IP address for Type 3 LSAs or Type 5 LSAs the router’s OSPF router ID for Type 1 LSAs or Type 4 LSAs the default destination (0.0.0.0) for Type 5 LSAs
adv-router ip-address	(OPTIONAL) Enter the keywords `adv-router` then the IP address of an Advertising Router to display only the LSA information about that router.

Command Modes

EXEC
EXEC Privilege

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

The following describes the show ip ospf process-id database router command shown in the following example.

Item	Description
LS Age	Displays the LSA age.
Options	Displays the optional capabilities available on router. The following options can be found in this item: TOS-capability or No TOS-capability is displayed depending on whether the router can support Type of Service. DC or No DC is displayed depending on whether the originating router can support OSPF over demand circuits. E or No E is displayed on whether the originating router can accept AS External LSAs.
LS Type	Displays the LSA type.
Link State ID	Displays the Link State ID.
Advertising Router	Identifies the router ID of the LSA’s originating router.
LS Seq Number	Displays the link state sequence number. This number detects duplicate or old LSAs.
Checksum	Displays the Fletcher checksum of an LSA’s complete contents.
Length	Displays the length in bytes of the LSA.
Number of Links	Displays the number of active links to the type of router (Area Border Router or AS Boundary Router) listed in the previous line.
Link connected to:	Identifies the type of network to which the router is connected.
(Link ID)	Identifies the link type and address.
(Link Data)	Identifies the router interface address.
Number of TOS Metric	Lists the number of TOS metrics.
TOS 0 Metric	Lists the number of TOS 0 metrics.

Example

Dell#show ip ospf 100 database router
                                             
                                             OSPF Router with ID (1.1.1.10) (Process ID 100)
                                             
                                             Router (Area 0)
                                             
                                             LS age: 967
                                             Options: (No TOS-capability, No DC, E)
                                             LS type: Router
                                             Link State ID: 1.1.1.10
                                             Advertising Router: 1.1.1.10
                                             LS Seq Number: 0x8000012f
                                             Checksum: 0x3357
                                             Length: 144
                                             AS Boundary Router
                                             Area Border Router
                                             Number of Links: 10
                                             
                                             Link connected to: a Transit Network
                                             (Link ID) Designated Router address: 192.68.129.1
                                             (Link Data) Router Interface address: 192.68.129.1
                                             Number of TOS metric: 0
                                             TOS 0 Metric: 1
                                             
                                             Link connected to: a Transit Network
                                             (Link ID) Designated Router address: 192.68.130.1
                                             (Link Data) Router Interface address: 192.68.130.1
                                             Number of TOS metric: 0
                                             TOS 0 Metric: 1
                                             
                                             Link connected to: a Transit Network
                                             (Link ID) Designated Router address: 192.68.142.2
                                             (Link Data) Router Interface address: 192.68.142.2
                                             Number of TOS metric: 0
                                             TOS 0 Metric: 1
                                             
                                             Link connected to: a Transit Network
                                             (Link ID) Designated Router address: 192.68.141.2
                                             (Link Data) Router Interface address: 192.68.141.2
                                             Number of TOS metric: 0
                                             TOS 0 Metric: 1
                                             
                                             Link connected to: a Transit Network
                                             (Link ID) Designated Router address: 192.68.140.2
                                             (Link Data) Router Interface address: 192.68.140.2
                                             Number of TOS metric: 0
                                             TOS 0 Metric: 1
                                             
                                             Link connected to: a Stub Network
                                             (Link ID) Network/subnet number: 11.1.5.0
                                             --More--

Related Commands

show ip ospf database — displays OSPF database information.