Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

remote-fault-signaling rx

Brings the interface up or down when a Remote Fault Indication (RFI) error is detected.

Syntax

remote-fault-signaling rx {on | off}

Parameters

on	Brings the interface up when an RFI error is detected.
off	Brings the interface down when an RFI error is detected.

Defaults

ON.

Command Modes

INTERFACE CONFIGURATION

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.7(0.0)	Introduced on the MXL switch.

Usage Information

By default, the switch processes the RFI errors transmitted by remote peers and brings down the interface when an RFI error is detected.

Example

Dell(conf-if-te-1/3)#remote-fault-signaling rx ?
                                             on Enable
                                             off Disable