Dell Precision 5510 Owner's Manual

Removing the Display Assembly

1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the:
   1. base cover
   2. battery
3. Perform the following steps:
   1. Disconnect the left LVDS cable [1].
   2. Remove the screw securing the metal bracket [2] and lift the bracket off the computer [3].
   3. Disconnect the right LVDS cable from the system board [4].
   
4. Place the computer at the edge of a table as shown and remove the screws [1] securing the display assembly to the computer. Then, lift the display assembly off the computer [2].