Configuring the setup, system, and hard disk drive passwords
You can set or change the setup password (setuppwd) also known as BIOS password, the system password (syspwd), and the hard disk drive password (hddpwd).
To edit the setup, system, or hard disk drive password:
In the
Edit
mode, click the
Value to Set text box of the required option.
The corresponding password screen is displayed.
NOTE:To display the password as clear text, select
Show Password. When you select
Show Password, then the
Confirm Password
text box is not displayed. Type the password in the
Password
text box.
NOTE:The setup and system passwords must contain a minimum of four characters.
Type the same password in the
Confirm Password
text box to confirm the password.
If both the entries match, then a green color check mark is displayed next to the
Confirm Password
text box. A red X mark is displayed if both entries do not match.