NOTE:You can set the critical
and non-critical upper threshold values only for voltage, current,
cooling and temperature probes.
To set the non-critical
threshold values for the probes:
Click the required option:
Create Multiplatform Package
Create Local System Package
Open a Saved Package
NOTE:To open
a saved package, click Open a Saved Package, browse to the file location, and then click Open.
Click Edit, or double-click
the option.
In the advsm option
row, click View/Change in the Value
to set column.
The Advanced System Management screen is displayed.
NOTE:
If you are setting the non-critical threshold values
for Create Local System Package, the columns
displayed are: Description, Type, Index, Location, Minimum, Maximum, Critical
Upper Threshold, NonCritical Upper Threshold, and Delete. The system displays the details
of the available probes. You cannot edit the Type and Index fields of the listed probes.
If you are setting the non-critical threshold values
for Create Multiplatform System Package, the
columns displayed are: Type, Index, NonCritical Upper Threshold and Delete. The system does not display any values for the
probes. You have to set the values for Index, and NonCritical Upper Threshold fields for
each of the selected probes. Set the value of Index depending on the number of instances of the probes running on the
system. The value of NonCritical Upper Threshold must be within the critical upper threshold range.
To set the non-critical threshold values for
a new probe, click Add Probe, and then type
the values in the required fields.
To set the non-critical threshold value for
the listed probes, provide the value in the respective column.