Before you deploy the
Cyber Recovery solution on AWS, create Amazon Elastic Compute Cloud (EC2) key pairs. For instructions, see
Amazon EC2 Key Pairs.
The key pairs provide secure logins in the
AWS VPC to access the:
Jump host
Cyber Recovery management host
DDVE
NOTE:Dell Technologies recommends that you create three key pairs, one for each instance.
When the EC2 instances are deployed, use the key pairs to access the instances. Ensure that you have access to the key pairs.
Ensure that you have network knowledge about how to connect to the
AWS VPC:
VPC in Classless Inter-Domain Routing (CIDR) format
The minimum CIDR block range for a
Cyber RecoveryAWS VPC is /27, which provides 32 total IP addresses. This minimum allows each of the subnets that are created to meet the AWS minimum CIDR range of /28, which provides 16 IP addresses per subnet.
Subnets in CIDR format
Subnets must be within the VPC range
The minimum subnet is a /28 subnet, which provides 16 addresses
The maximum subnet netmask is a /16 subnet, which provides 65,534 addresses
IP address of the production workstation that connects to the jump host in AWS
If there are five VPCs in the region in which you want to deploy the
Cyber Recovery software, remove a VPC or request an increase from AWS.
By default, AWS allows you to create five VPCs per region.
Ensure that you have access to the
Cyber Recovery
and Amazon Machine Image (AMI).
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\