Dell PowerProtect Cyber Recovery 19.14 Command-Line Interface Reference Guide

Syntax

crcli schedules add --schedulename <name> --policyname <policy> --action {securecopy | securecopyanalyze | sync-copy | copy-lock | sync | copy | analyze | recoverycheck} --startdate <"date and time"> --hours <number of hours> --days <number of days>[--appnickname <nickname>][--excludefilepath file path][--excludefiles <"filename">][--includefilepath file path][--includefiles <"filename">][--contentformat {filesystem | databases | backups}][--retlockduration <length of time>][--storagedatainterface <linterface name>] 

Parameters

--action, -a {securecopy | securecopyanalyze | sync-copy | copy-lock | sync | copy | analyze | recoverycheck}

(Required) The action that you want the policy to run.

--appnickname, -c <nickname>

(Required; used with the analyze action) A meaningful name for the application

--contentformat, -t {filesystem | databases | backups}

(Optional; used with the analyze action) The type of data to be analyzed

--days -d <number of days>

(Required) Interval of schedule runs in days

NOTE:Not required if --days is set. If the interval exceeds 24 hours, a combination of days and hours is required.

--excludefilepath, -p <"file path">

(Optional; used with the analyze action) File path to exclude from an analyze operation

--excludefiles, -e <"filename">

(Optional; used with the analyze action) Files to exclude from an analyze action

--hours, -h <number of hours>

(Required) Interval of schedule runs in hours

NOTE:Not required if --days is set. If the interval exceeds 24 hours, a combination of days and hours is required.

--includefilepath, -f <"file path">

(Optional; used with the analyze action) File path to include in an analyze operation

--includefiles, -i <"filename">

(Optional; used with the analyze action) Files to include in an analyze action

--policyname, -p <policy name>

(Required) The name of the policy

--retlockduration, -r <length of time>

(Optional) Overrides the retention lock duration that is configured for the policy

--schedulename, -n <schedule name>

(Required) The name of the schedule

--startdate, -s <"date and time">

(Required) The date and time for the schedule to run. Follow the format of this example: "07/10/21 3:00PM EDT".

--storagedatainterface, -g <interface name>

(Optional; used with the analyze action with CyberSense version 8.2 and earlier) The network storage interface through which CyberSense connects to storage.

Example

[root@cr-system]# crcli schedules add --schedulename schedule01 --policyname phm-policy --action securecopy --startdate "07/10/21 3:00PM EDT" --hours 1

Schedule: schedule01 added to the system successfully.