Dell Command Line Reference Guide for the S4048–ON System 9.14.2.8

ipv6 nd ra–guard attach–policy

Apply the IPv6 RA guard to a specific interface.

Syntax

ipv6 nd ra-guard attach—policy policy-name [vlan [vlan 1, vlan 2, vlan 3.....]]

Parameters

policy policy-name

Enter the keyword policy then the policy name. The policy-name allows a maximum of 140 characters.

vlan [vlan 1, vlan 2, vlan 3........]

Enter the keyword vlan then the VLAN range. The VLAN range is from 1 to 4094.

Defaults

None

Command Modes

INTERFACE

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide.

Version

Description

9.11(0.0)

Introduced on the C9010.

9.10(0.1)

Introduced on the S6010-ON and S4048T-ON.

9.10(0.0)

Introduced on the S3148.

9.10(0.0)

Introduced on the S6100-ON.

9.9(0.0)

Introduced on the Z9500.

9.8(2.0)

Introduced on the S3100 series.

9.8(1.0)

Introduced on the Z9100-ON.

9.8(0.0P5)

Introduced on the S4048-ON.

9.8(0.0P2)

Introduced on the S3048-ON.

9.7(0.0)

Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9000 switches.

Related Commands

• show ipv6 nd ra-guard policy — display the configuration applied on all the RA guard policies or a specific RA guard policy.