The section provides recommended hardware requirements for OpenManage Enterprise running with and without plug-ins in small and large deployments.
For more specific information about plug-in hardware requirements, see the User's Guide of the respective OpenManage Enterprise plug-in.
Maximum recommended hardware configuration
Starting from the OpenManage Enterprise 4.0 version, the appliance is shipped with the maximum recommended hardware requirements to provide you a hassle-free deployment and installation of the appliance and plug-ins respectively. However, if your environment does not require the maximum hardware configuration, see
Manage hardware requirements to determine the appropriate hardware resources required for your specific requirements. The following table lists recommended hardware requirements for installing OpenManage Enterprise and all of its plugins.
Manage memory and CPU requirements based on deployment size
If your environment does not require the maximum hardware configuration, review the following table to determine the appropriate hardware resources required for your specific requirements.
Table 2. Large deployment where the maximum number of devices managed by OpenManage Enterprise is up to 8,000 Large deployment where the maximum number of devices that are managed by OpenManage Enterprise is up to 8,000.
OpenManage Enterprise Integration for VMware vCenter (OMEVV)
+5 GB
Operations Manager (Integration for Microsoft SCOM)
+3 GB
VMM and Configuration Manager (Integration for Microsoft SCVMM and MCM)
+1 GB
Total recommended hardware configuration with all plug-ins installed
64 GB
8 CPU cores
Table 3. Small deployment where the maximum number of devices managed by OpenManage Enterprise is up to 1,000Small deployment where the maximum number of devices that are managed by OpenManage Enterprise is up to 1,000.
OpenManage Enterprise appliance is configured with two VDs, each with an initial storage space of 415 GB. The primary VD is leveraged for the core application and database while the secondary VD is required for additional features and supporting plugins. However, even without the secondary VDs selected during deployment, the appliance can still boot up for TUI configuration using only the primary VHDX.
Ensure that your hypervisor storage has enough free space to support the recommended virtual disk size of the appliance, and enough overhead to support snapshots and future expansion of the virtual disk.
Ensure that the primary disk and the secondary disk are identical in size always.
NOTE:If you want to migrate from an OpenManage Enterprise 3.10.x appliance to a later version, while deploying the OpenManage Enterprise 4.0.x version, ensure that you allocate the minimum required memory (required for the migration of both OpenManage Enterprise and its plug-ins from 3.10.x) even if you plan to decline the installation of default plug-ins during the migration process. Else, migration will not be allowed.
NOTE:If you want to migrate from an OpenManage Enterprise 3.10.x appliance to a later version, while deploying the OpenManage Enterprise 4.0.x version, ensure that you allocate the minimum required memory (required for the migration of both OpenManage Enterprise and its plug-ins from 3.10.x) even if you plan to decline the installation of default plug-ins during the migration process. Else, migration will not be allowed.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\