Dell OpenManage SNMP Reference Guide Version 8.3

PDF

Channel Table

This table describes available properties for each channel on the managed system.

The following object sets up the Channel Table.

Table 1. Channel Table
Name	channelTablechannelTable
Object ID	1.3.6.1.4.1.674.10893.1.20.130.2
Description	Defines the channel table.
Syntax	SEQUENCE OF ChannelEntry
Access	Not accessible

Table 2. Channel Entry
Name	channelEntrychannelEntry
Object ID	1.3.6.1.4.1.674.10893.1.20.130.2.1
Description	Defines the channel table entry.
Syntax	ChannelEntry
Access	Not accessible
Index	channelNumberchannelNumber

Table 3. Channel Number
Name	channelNumberchannelNumber
Object ID	1.3.6.1.4.1.674.10893.1.20.130.2.1.1
Description	Identifies the instance number of the channel entry.
Syntax	Integer
Access	Read-only

Table 4. Channel Name
Name	channelNamechannelName
Object ID	1.3.6.1.4.1.674.10893.1.20.130.2.1.2
Description	Identifies the name of the channel as represented in Storage Management. The name includes the word channel and the instance. For example: Channel 1.
Syntax	DisplayString
Access	Read-only

Table 5. Channel State
Name	channelStatechannelState
Object ID	1.3.6.1.4.1.674.10893.1.20.130.2.1.3
Description	Identifies the current state of this channel. Possible states: 0: Unknown 1: Ready - The I/O has resumed. 2: Failed 3: Online 4: Offline - The I/O has paused. 6: Degraded
Syntax	Integer
Access	Read-only

Table 6. Channel Severity
Name	channelSeveritychannelSeverity
Object ID	1.3.6.1.4.1.674.10893.1.20.130.2.1.4
Description	This entry is obsolete for Storage Management. It was replaced with RollUpStatus and ComponentStatus for each device.
Syntax	Integer
Access	Read-only

Table 7. Channel Termination
Name	channelTerminationchannelTermination
Object ID	1.3.6.1.4.1.674.10893.1.20.130.2.1.5
Description	Identifies the type of SCSI termination on this channel. Termination is required for proper operation of this channel. Possible values: 1: Wide Termination (16 bit) 2: Narrow Termination (8 bit) 3: Not Terminated
Syntax	Integer
Access	Read-only

Table 8. Channel SCSI ID
Name	channelSCSIIDchannelSCSIID
Object ID	1.3.6.1.4.1.674.10893.1.20.130.2.1.6
Description	Identifies the SCSI ID of the controller to which the channel belongs.
Syntax	Integer
Access	Read-only

Table 9. Channel Roll-Up Status
Name	channelRollUpStatuschannelRollUpStatus
Object ID	1.3.6.1.4.1.674.10893.1.20.130.2.1.7
Description	Identifies the severity of the channel state. This is the combined status of the channel and its components. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Syntax	DellStatus
Access	Read-only

Table 10. Channel Component Status
Name	channelComponentStatuschannelComponentStatus
Object ID	1.3.6.1.4.1.674.10893.1.20.130.2.1.8
Description	The status of the channel itself without the propagation of any contained component status. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Syntax	DellStatus
Access	Read-only

Table 11. Channel Nexus ID
Name	channelNexusIDchannelNexusID
Object ID	1.3.6.1.4.1.674.10893.1.20.130.2.1.9
Description	Durable unique ID for this channel.
Syntax	DisplayString
Access	Read-only

Table 12. Channel Data Rate
Name	channelDataRatechannelDataRate
Object ID	1.3.6.1.4.1.674.10893.1.20.130.2.1.10
Description	Identifies the data rate of this channel.
Syntax	DisplayString
Access	Read-only

Table 13. Channel Bus Type
Name	channelBusTypechannelBusType
Object ID	1.3.6.1.4.1.674.10893.1.20.130.2.1.11
Description	The bus type of the channel. Possible values: 1: SCSI 2: IDE 3: Fibre Channel 4: Serial Storage Architecture (SSA) 6: Universal Serial Bus (USB) 7: SATA 8: SAS 9: PCIe
Syntax	Integer
Access	Read-only