- Notes, cautions, and warnings
- Introduction
- What’s New in this release
- Supported SNMP Versions
- Managed Object Used in This Document
- Server Administrator Instrumentation MIB
- Server Administrator Baseboard Management Controller, ASF MIB
- Server Administrator Storage Management MIB
- Server Administrator Field Replaceable Unit MIB
- Server Administrator Change Management MIB
- Basic Terminology
- Frequently Used Terms in Variable Names
- Tables
- Section Organization
- Other Documents You May Need
- Introduction to the Server Administrator SNMP Subagent
- Server Administrator Group
- Instrumentation MIB Version Group
- Systems Management Software Group
- System State Group
- Chassis Information Group
- Operating System Group
- System Resource Group
- Power Group
- Thermal Group
- Remote Flash BIOS Group
- Port Group
- Device Group
- Device Tables
- Pointing Device Table
- Keyboard Device Table
- Processor Device Table
- Processor Device Status Table
- Cache Device Table
- Memory Device Table
- Memory Device Mapped Address Table
- Generic Device Table
- PCI Device Table
- PCI Device Configuration Space Table
- Network Device Table
- Managed System Services Device Table
- SD Card Unit Table
- SD Card Device Table
- Device Group Variable Values
- Device Tables
- Slot Group
- Memory Group
- BIOS Setup Control Group
- Local Response Agent Group
- Cost of Ownership Group
- Cluster Group
- Baseboard Management Controller Group
- Field Replaceable Unit Group
- Storage Management Group
- Storage Management Group
- Storage Management Information Group
- Global Data Group
- Physical Devices Group
- Controller Table
- Channel Table
- Enclosure Table
- Array Disk Table
- Array Disk Enclosure Connection Table
- Array Disk Channel Connection Table
- Fan Table
- Fan Connection Table
- Power Supply Table
- Power Supply Connection Table
- Temperature Probe Table
- Temperature Probe Connection Table
- Enclosure Management Module Table
- Enclosure Management Module Connection Table
- Battery Table
- Battery Connection Table
- Tape Drive Table
- NVME adapter table
- Logical Devices Group
- Storage Management Event Group
- Change Management Group
- SNMP Traps
- Storage Management Alert Reference
- Standard Data Type Definitions
- SNMP Sample Output
Dell OpenManage SNMP Reference Guide Version 8.3
Local Response Agent Variable Values
This section
includes definitions for server administrator-specific variable values
used in this section.
| Variable Name: DellLocalResponseAgentCapabilitiesUnique DellLocalResponseAgentCapabilitiesUnique | |
| Data Type: Integer Integer | |
| Possible Data Values | Meaning of Data Value |
| speakerControlCapable(1) speakerControlCapable(1) | The LRA can issue a speaker beep. |
| consoleAlertCapable(2) consoleAlertCapable(2) | The LRA can alert the console. |
| broadcastMessageCapable(4) broadcastMessageCapable(4) | The LRA can broadcast a message. |
| osShutDownCapable(8) osShutDownCapable(8) | The LRA can shut down the operating system. |
| rebootCapable(16) rebootCapable(16) | The LRA can reboot the system. |
| powerCycleCapable(32) powerCycleCapable(32) | The LRA is capable of a system power cycle. |
| powerOFFCapable(64) powerOFFCapable(64) | The LRA can shut the system power off. |
| executeApplicationCapable(256) executeApplicationCapable(256) | The LRA can execute a user mode application. |
| lraFullyCapable(383) lraFullyCapable(383) | The LRA has all of the preceding capabilities. |
| Variable Name: DellLRAThermalShutdownCapabilitiesUnique DellLRAThermalShutdownCapabilitiesUnique | |
| Data Type: IntegerInteger | |
| Possible Data Values | Meaning of Data Value |
| none(0) none(0) | The LRA has no thermal shutdown capabilities. |
| Unknown capabilities(1) Unknown capabilities(1) | The LRA’s thermal shutdown capabilities are unknown. |
| enableCapable(2) enableCapable(2) | The LRA can be disabled (offline, a binary 0 value) or enabled (online, a binary 1 value). |
| warningCapable(4) warningCapable(4) | The LRA can carry out chassis-determined action(s) when a warning condition is detected. |
| enableOnWarningCapable(6) enableOnWarningCapable(6) | The LRA enables activation of chassisdetermined action(s) when a warning condition is detected. |
| failureCapable(8) failureCapable(8) | The LRA can carry out chassis-determined action(s) when a failure condition is detected. |
| enableOnFailureCapable(10) enableOnFailureCapable(10) | The LRA enables activation of chassisdetermined action(s) when a failure condition is detected. |
| enableOnWarningOrFailure Capable(14) enableOnWarningOrFailure Capable(14) | The LRA enables activation of chassisdetermined action(s) when either a failure or a warning condition is detected. |
| Variable Name: DellLocalResponseAgentSettingsUnique DellLocalResponseAgentSettingsUnique | |
| Data Type: IntegerInteger | |
| Possible Data Values | Meaning of Data Value |
| speakerControl(1) speakerControl(1) | LRA is set to issue a speaker beep. |
| consoleAlert(2) consoleAlert(2) | LRA is set to issue a console alert. |
| broadcastMessage(4) broadcastMessage(4) | LRA is set to issue a broadcast message. |
| osShutDown(8) osShutDown(8) | LRA is set to issue an operating system shutdown. |
| reboot(16) reboot(16) | LRA is set to issue a system reboot. |
| powerCycle(32) powerCycle(32) | LRA is set to issue a system power cycle. |
| powerOFF(64) powerOFF(64) | LRA is set to issue a system power off. |
| executeApplication(256) executeApplication(256) | LRA is set to start a user mode application. |
| allLRASettingsUnique(383) allLRASettingsUnique(383) | LRA is set to all LRA settings combinations. |
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\