- Notes, Cautions, and Warnings
- Introduction
- AMP Event Messages
- ASR Event Messages
- BAR Event Messages
- BAT Event Messages
- BIOS Event Messages
- BOOT Event Messages
- CBL Event Messages
- CMC Event Messages
- CPU Event Messages
- CPUA Event Messages
- CTL Event Messages
- DH Event Messages
- DIAG Event Messages
- DIS Event Messages
- DKM Event Messages
- ECM Event Messages
- ENC Event Messages
- EPP Event Messages
- FAN Event Messages
- FC Event Messages
- FCD Event Messages
- FLDC Event Messages
- FSD Event Messages
- HWC Event Messages
- IOID Event Messages
- IOV Event Messages
- IPA Event Messages
- ISM Event Messages
- JCP Event Messages
- LC Event Messages
- LIC Event Messages
- LNK Event Messages
- LOG Event Messages
- MEM Event Messages
- NIC Event Messages
- OSD Event Messages
- OSE Event Messages
- PCI Event Messages
- PDR Event Messages
- PFM Event Messages
- POW Event Messages
- PR Event Messages
- PST Event Messages
- PSU Event Messages
- PSUA Event Messages
- PWR Event Messages
- RAC Event Messages
- RDU Event Messages
- RED Event Messages
- RFL Event Messages
- RFLA Event Messages
- RFM Event Messages
- RRDU Event Messages
- RSI Event Messages
- SEC Event Messages
- SEL Event Messages
- SSD Event Messages
- STOR Event Messages
- SUP Event Messages
- SWC Event Messages
- SWU Event Messages
- SYS Event Messages
- TMP Event Messages
- TMPS Event Messages
- TST Event Messages
- UEFI Event Messages
- USR Event Messages
- VDR Event Messages
- VF Event Messages
- VFL Event Messages
- VFLA Event Messages
- VLT Event Messages
- VME Event Messages
- VRM Event Messages
Event and Error Message Reference Guide for 13th Generation Dell PowerEdge ServersVersion 1.2
VDR Event Messages
VDR1
- Message
- arg1 failed.
- Arguments
- arg1 = VD Name
- Detailed Description
- A storage component such as a physical disk or an enclosure has failed. The failed component may have been identified by the controller while performing a task such as a rescan or a check consistency.
- Recommended Response Action
- Replace the failed component. You can identify which component has failed by locating the component that has a red "X" for its status. Perform a rescan after replacing the failed component.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 4353
VDR10
- Message
- Formatting the arg1 has started.
- Arguments
- arg1 = VD Name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2059
- OMSA Trap ID
- 120100
VDR100
- Message
- arg1 is unavailable because of incompatibilities with the current controller.
- Arguments
- arg1 = virtual disk
- Detailed Description
- The virtual disk identified in message cannot be used because of missing features on the current controller. The features may be missing because they are not available in the firmware version on the controller or the necessary licenses are not installed.
- Recommended Response Action
- Update the controller firmware and license to match the peer controller.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 2 (Warning)
- Trap/EventID
- 4354
- OMSA Event ID
- 2369
- OMSA Trap ID
- 120100
VDR101
- Message
- Hot Spare Protection policy deviation with severity set at Informational level occured for arg1 .
- Arguments
- arg1 = virtual disk names
- Detailed Description
- The number of hot spares available for the virtual disks identified in the message are not compliant with Hot Spare Protection policy, whose severity is set at Informational level.
- Recommended Response Action
- Make appropriate assignments of hotspares to meet the policy.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- OMSA Event ID
- 2383
- OMSA Trap ID
- 120100
VDR101
- Message
- Virtual Adapter mapping reported for arg1 . Virtual Adapter 1 is now arg2 . Virtual Adapter 2 is now arg3 . Virtual Adapter 3 is now arg4 . Virtual Adapter 4 is now arg5
- Arguments
- arg1 = Virtual Disk Name, arg2 = Access Policy 1, arg3 = Access Policy 2, arg4 = Access Policy 3, arg5 = Access Policy 4
- Detailed Description
- Indicates the Virtual Disk to Virtual Adapter Mapping for audit purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
VDR102
- Message
- Hot Spare Protection policy deviation with severity set at Warning level occured for arg1 .
- Arguments
- arg1 = virtual disk names
- Detailed Description
- The number of hot spares available for the virtual disks identified in the message are not compliant with Hot Spare Protection policy, whose severity is set at Warning level.
- Recommended Response Action
- Make appropriate assignments of hotspares to meet the policy.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 2 (Warning)
- OMSA Event ID
- 2384
- OMSA Trap ID
- 120300
VDR103
- Message
- Hot Spare Protection policy deviation with severity set at Critical level occured for arg1 .
- Arguments
- arg1 = virtual disk names
- Detailed Description
- The number of hot spares available for the virtual disks identified in the message are not compliant with Hot Spare Protection policy, whose severity is set at Critical level.
- Recommended Response Action
- Make appropriate assignments of hotspares to meet the policy.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 1 (Critical)
- OMSA Event ID
- 2385
- OMSA Trap ID
- 120400
VDR104
- Message
- Successfully secured arg1 .
- Arguments
- arg1 = virtual disk name
- Detailed Description
- The secure virtual disk operation was successful on the security capable virtual disk identified in the message. A security capable virtual disk is created using only Self-Encrypting Drives (SED).
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- OMSA Event ID
- 2393
- OMSA Trap ID
- 120100
VDR105
- Message
- The arg1 on power save mode drives is available.
- Arguments
- arg1 = virtual disk name
- Detailed Description
- Virtual Disk creation using power save mode drives successfully completed and the Virtual Disk identified in the message is ready for use.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- OMSA Event ID
- 2403
- OMSA Trap ID
- 120100
VDR106
- Message
- arg1 on spun down power save mode drives is not available.
- Arguments
- arg1 = virtual disk name
- Detailed Description
- This alert is generated after successfully configuring a virtual disk on at least one spundown drive. The virtual disk creation is not yet complete on the remaining spundown drives because the drives are still spinning up.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- OMSA Event ID
- 2404
- OMSA Trap ID
- 120100
VDR107
- Message
- Successfully resized Controller Enhanced cache ( arg1 ).
- Arguments
- arg1 = virtual disk name
- Detailed Description
- The Controller Enhanced cache identified in the message was successfully resized.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- OMSA Event ID
- 2412
- OMSA Trap ID
- 120100
VDR108
- Message
- Successfully created Controller Enhanced cache ( arg1 ).
- Arguments
- arg1 = virtual disk name
- Detailed Description
- The Controller Enhanced cache identified in the message was successfully created.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- OMSA Event ID
- 2413
- OMSA Trap ID
- 120100
VDR109
- Message
- Successfully deleted Controller Enhanced cache ( arg1 ).
- Arguments
- arg1 = virtual disk name
- Detailed Description
- The Controller Enhanced cache identified in the message was successfully deleted.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- OMSA Event ID
- 2414
- OMSA Trap ID
- 120100
VDR11
- Message
- arg1 has started initializing.
- Arguments
- arg1 = virtual disk
- Detailed Description
- This message is generated after initialization of a virtual disk starts.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2061
- OMSA Trap ID
- 120100
VDR110
- Message
- Unrecoverable storage medium error detected on arg1 .
- Arguments
- arg1 = virtual disk name
- Detailed Description
- This alert is generated when an unrecoverable storage medium error is detected on the virtual disk. This error can be a prelude to the physical disk disk becoming non-functional.
- Recommended Response Action
- Make sure a hot spare to the Virtual Disk identified in the message is available and back up the data on the virtual disk.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 1 (Critical)
- OMSA Event ID
- 2417
- OMSA Trap ID
- 120400
VDR111
- Message
- Corrected disk storage medium error on arg1 .
- Arguments
- arg1 = virtual disk name
- Detailed Description
- The controller corrected a disk storage medium error on one of the participating physical disks of the virtual disk identified in the message.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- OMSA Event ID
- 2418
- OMSA Trap ID
- 120100
VDR112
- Message
- Deleted the arg1 .
- Arguments
- arg1 = virtual disk
- Detailed Description
- The controller removed a virtual disk because of a delete virtual disk operation or a reset configuration operation.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 2 (Warning)
VDR12
- Message
- arg1 reconfiguration has started.
- Arguments
- arg1 = virtual disk
- Detailed Description
- This message is generated after reconfiguration of a virtual disk starts.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2063
- OMSA Trap ID
- 120100
VDR13
- Message
- arg1 rebuild has started.
- Arguments
- arg1 = VD Name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2064
- OMSA Trap ID
- 120100
VDR14
- Message
- The consistency check on arg1 was cancelled.
- Arguments
- arg1 = virtual disk
- Detailed Description
- A user cancelled the consistency check operation for a virtual disk.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2067
- OMSA Trap ID
- 120100
VDR15
- Message
- Initialization of arg1 was cancelled.
- Arguments
- arg1 = virtual disk
- Detailed Description
- The initialization operation could not be completed. This may be due to a user action or a physical disk failure.
- Recommended Response Action
- If a physical disk failed, then replace the physical disk. Restart the virtual disk initialization.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2070
- OMSA Trap ID
- 120100
VDR16
- Message
- Consistency check of arg1 failed.
- Arguments
- arg1 = virtual disk
- Detailed Description
- A physical disk included in the virtual disk failed or there is an error in the parity information. A failed physical disk causes errors in parity information.
- Recommended Response Action
- Check that all the physical disks of the virtual disk are in a healthy condition. Replace any disks that are not healthy and restart the operation. If this is not the problem, delete the virtual disk and restore the data to the disk from a backup copy.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 4353
- OMSA Event ID
- 2076
- OMSA Trap ID
- 120400
VDR17
- Message
- arg1 format failed.
- Arguments
- arg1 = VD Name
- Detailed Description
- A physical disk included in the virtual disk failed.
- Recommended Response Action
- Replace the failed physical disk. Identify the failed physical disk by locating the disk that has a red "X" for its status. Rebuild the physical disk. When finished, restart the virtual disk format operation.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 4353
- OMSA Event ID
- 2077
- OMSA Trap ID
- 120400
VDR18
- Message
- Initialization of arg1 has failed.
- Arguments
- arg1 = virtual disk
- Detailed Description
- A physical disk included in the virtual disk has failed or was removed.
- Recommended Response Action
- If a physical disk has failed, replace the physical disk. Restart the virtual disk initialization.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 4353
- OMSA Event ID
- 2079
- OMSA Trap ID
- 120400
VDR19
- Message
- Reconfiguration of arg1 has failed.
- Arguments
- arg1 = virtual disk
- Detailed Description
- The reconfiguration operation was not completed. This may be due to a user action or a physical disk failure.
- Recommended Response Action
- Recreate the virtual disk and restore data from a backup copy.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 4353
- OMSA Event ID
- 2081
- OMSA Trap ID
- 120400
VDR2
- Message
- arg1 returned to optimal state.
- Arguments
- arg1 = virtual disk
- Detailed Description
- The virtual disk has returned to a healthy state and is working properly.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
VDR20
- Message
- arg1 rebuild failed.
- Arguments
- arg1 = VD Name
- Detailed Description
- A physical disk included in the virtual disk has failed or is corrupt. You may also have cancelled the rebuild.
- Recommended Response Action
- Replace the failed or corrupt disk. You can identify a disk that has failed by locating the disk that has a red "X" for its status. Restart the virtual disk rebuild.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 4353
- OMSA Event ID
- 2082
- OMSA Trap ID
- 120400
VDR21
- Message
- Consistency check for arg1 has completed.
- Arguments
- arg1 = virtual disk
- Detailed Description
- This message is generated after a consistency check completes on a virtual disk.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2085
- OMSA Trap ID
- 120100
VDR22
- Message
- Formatting the arg1 is completed.
- Arguments
- arg1 = VD Name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2086
- OMSA Trap ID
- 120100
VDR23
- Message
- Initialization of arg1 has completed.
- Arguments
- arg1 = virtual disk
- Detailed Description
- This message is generated after initialization completes on a virtual disk.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2088
- OMSA Trap ID
- 120100
VDR24
- Message
- Reconfiguration of arg1 has completed.
- Arguments
- arg1 = virtual disk
- Detailed Description
- The re-configuration operation on the virtual disk completed.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2090
- OMSA Trap ID
- 120100
VDR25
- Message
- arg1 rebuild is completed.
- Arguments
- arg1 = VD Name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2091
- OMSA Trap ID
- 120100
VDR26
- Message
- The check consistency on a arg1 has been paused (suspended).
- Arguments
- arg1 = VD Name
- Detailed Description
- You paused the Check Consistency operation on a virtual disk.
- Recommended Response Action
- To resume the Check Consistency operation, right-click the virtual disk in the Storage Management tree view and select Resume Check Consistency.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2114
- OMSA Trap ID
- 120100
VDR27
- Message
- The consistency check on a arg1 has been resumed.
- Arguments
- arg1 = VD Name
- Detailed Description
- The check consistency on a virtual disk has resumed processing after a pause.
- Recommended Response Action
- This alert is provided for informational purposes.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2115
- OMSA Trap ID
- 120100
VDR28
- Message
- A virtual disk and its mirror have been split.
- Detailed Description
- A user has caused a mirrored virtual disk to be split. When a virtual disk is mirrored, its data is copied to another virtual disk to maintain redundancy. After being split, both virtual disks retain a copy of the data. Because the mirror is no longer intact, updates to the data are no longer copied to the mirror.
- Recommended Response Action
- This alert is provided for informational purposes.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2116
- OMSA Trap ID
- 120100
VDR29
- Message
- A mirrored virtual disk has been un-mirrored.
- Detailed Description
- A mirrored virtual disk is un-mirrored. When a virtual disk is mirrored, its data is copied to another virtual disk to maintain redundancy. After being un-mirrored, the disk formerly used as the mirror returns to being a physical disk and becomes available for inclusion in another virtual disk.
- Recommended Response Action
- This alert is provided for informational purposes.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2117
- OMSA Trap ID
- 120100
VDR3
- Message
- Redundancy normal on arg1 .
- Arguments
- arg1 = VD Name
- Detailed Description
- Data redundancy has been restored to a virtual disk that previously suffered a loss of redundancy.
- Recommended Response Action
- This alert is provided for informational purposes.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
VDR30
- Message
- arg1 write policy has changed.
- Arguments
- arg1 = virtual disk
- Detailed Description
- A user changed the write policy for a virtual disk.
- Recommended Response Action
- This alert is provided for informational purposes.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2118
- OMSA Trap ID
- 120100
VDR31
- Message
- Controller cache is preserved for missing or offline arg1 .
- Arguments
- arg1 = VD Name
- Detailed Description
- The controller is getting disconnected from its virtual disk, while Input Output (IO) is in-progress.
- Recommended Response Action
- Try importing foreign disks, if any. Check if the enclosure containing the Virtual Disk is disconnected from the controller. Insert any disks that are reported missing or failed. If the enclosure or disks were removed intentionally, the preserved cache can be discarded. See storage hardware documentation for more information on performing these steps.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 2 (Warning)
- Trap/EventID
- 4354
- OMSA Event ID
- 2125
- OMSA Trap ID
- 120300
VDR32
- Message
- Background initialization has started for arg1 .
- Arguments
- arg1 = virtual disk
- Detailed Description
- Background initialization of a virtual disk has started. This is an automated process that writes the parity or mirror data on newly created virtual disks.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2127
- OMSA Trap ID
- 120100
VDR33
- Message
- Background initialization was cancelled for arg1 .
- Arguments
- arg1 = virtual disk
- Detailed Description
- Background initialization of a virtual disk was cancelled. This may be due to user action. This operation may automatically restart.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2128
- OMSA Trap ID
- 120100
VDR34
- Message
- Background initialization failed for arg1 .
- Arguments
- arg1 = virtual disk
- Detailed Description
- Background initialization of a virtual disk failed.
- Recommended Response Action
- Run a consistency check on the virtual disk. If that fails, check the health of the member drives of the virtual disk and then recreate.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 4353
- OMSA Event ID
- 2129
- OMSA Trap ID
- 120400
VDR35
- Message
- Background initialization has completed for arg1 .
- Arguments
- arg1 = virtual disk
- Detailed Description
- Background initialization of a virtual disk completed.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2130
- OMSA Trap ID
- 120100
VDR36
- Message
- arg1 initialization is in-progress arg2 .
- Arguments
- arg1 = VD Name, arg2 = progresspercent
- Detailed Description
- Virtual disk initialization is in-progress. This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
VDR37
- Message
- Dead disk segments are restored on arg1 .
- Arguments
- arg1 = VD Name
- Detailed Description
- Disk space that was formerly "dead" or inaccessible to a redundant virtual disk has been restored. This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2140
- OMSA Trap ID
- 120100
VDR38
- Message
- arg1 is renamed.
- Arguments
- arg1 = VD Name
- Detailed Description
- A user renamed a virtual disk. This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2159
- OMSA Trap ID
- 120100
VDR39
- Message
- The check consistency has made corrections and completed for arg1 .
- Arguments
- arg1 = VD name
- Detailed Description
- The virtual disk check consistency has identified issues and made corrections. For example, the check consistency may have encountered a bad disk block and remapped the disk block to restore data consistency. This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required. As a precaution, monitor the Log for other errors related to this virtual disk. If problems persist, contact technical support.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2192
- OMSA Trap ID
- 120300
VDR4
- Message
- arg1 was created.
- Arguments
- arg1 = virtual disk
- Detailed Description
- This message is generated after a virtual disk was created on a controller.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2053
- OMSA Trap ID
- 120100
VDR40
- Message
- The reconfiguration of arg1 has resumed.
- Arguments
- arg1 = virtual disk
- Detailed Description
- This message is generated after the reconfiguration of a virtual disk resumes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2193
- OMSA Trap ID
- 120100
VDR41
- Message
- arg1 read policy has changed.
- Arguments
- arg1 = VD Name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2194
- OMSA Trap ID
- 120100
VDR42
- Message
- Dedicated hot spare assigned physical disk arg1 .
- Arguments
- arg1 = args
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2195
- OMSA Trap ID
- 120100
VDR43
- Message
- Dedicated hot spare unassigned physical disk arg1 .
- Arguments
- arg1 = args
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2196
- OMSA Trap ID
- 120100
VDR44
- Message
- arg1 disk cache policy has changed.
- Arguments
- arg1 = VD Name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2199
- OMSA Trap ID
- 120100
VDR45
- Message
- arg1 blink has been initiated.
- Arguments
- arg1 = VD Name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2244
- OMSA Trap ID
- 120100
VDR46
- Message
- arg1 blink has ceased.
- Arguments
- arg1 = VD Name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2245
- OMSA Trap ID
- 120100
VDR47
- Message
- A disk media error was corrected on arg1 .
- Arguments
- arg1 = virtual disk
- Detailed Description
- A disk media error was detected while the controller was completing a background task. A bad disk block was identified. The disk block was remapped.
- Recommended Response Action
- Check the Lifecycle log for information related to members of this virtual disk.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2280
- OMSA Trap ID
- 120100
VDR48
- Message
- arg1 has inconsistent data.
- Arguments
- arg1 = VD Name
- Detailed Description
- This alert is provided for informational purposes. The virtual disk has inconsistent data. This may be caused when a power loss or system shutdown occurs while data is being written to the virtual disk.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2281
- OMSA Trap ID
- 120100
VDR49
- Message
- arg1 is permanently degraded.
- Arguments
- arg1 = VD Name
- Detailed Description
- A redundant virtual disk has lost redundancy. This may occur when the virtual disk suffers the failure of more than one physical disk. In this case, both the source physical disk and the target disk with redundant data have failed. A rebuild is not possible because there is no longer redundancy.
- Recommended Response Action
- Replace the failed disks and restore from backup.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 4353
- OMSA Event ID
- 2310
- OMSA Trap ID
- 120400
VDR5
- Message
- arg1 was deleted.
- Arguments
- arg1 = virtual disk
- Detailed Description
- The controller removed a virtual disk. This is due to a delete virtual disk operation, a reset configuration operation, or the removal of every physical disk that was a member of the virtual disk.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2054
- OMSA Trap ID
- 120100
VDR50
- Message
- Background Initialization (BGI) completed with uncorrectable errors on arg1 .
- Arguments
- arg1 = virtual disk
- Detailed Description
- The background initialization task encountered errors that cannot be corrected. The virtual disk contains physical disks that have unusable disk space or disk errors that cannot be corrected.
- Recommended Response Action
- Review other messages to identify whether the physical disk that has errors. If the virtual disk is redundant, you can replace the physical disk and continue using the virtual disk. If the virtual disk is non-redundant, you need to recreate the virtual disk after replacing the physical disk. After replacing the physical disk, run a consistency check to verify the data.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 4353
- OMSA Event ID
- 2340
- OMSA Trap ID
- 120400
VDR51
- Message
- The consistency check process made corrections and completed on arg1 .
- Arguments
- arg1 = virtual disk
- Detailed Description
- The consistency check completed on the virtual disk after making corrections.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2341
- OMSA Trap ID
- 120100
VDR52
- Message
- The consistency check found inconsistent parity data on arg1 .
- Arguments
- arg1 = virtual disk
- Detailed Description
- The data on physical disk members of the virtual disk does not match. Redundancy may be lost.
- Recommended Response Action
- Rerun the consistency check task. If you receive this message again, verify the health of the physical disks included in the virtual disk. See the storage hardware documentation for more information. Review messages for significant messages related to the physical disks. If a physical disk has a problem, replace it and restore from a backup copy. Contact technical support if the issue persists.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 2 (Warning)
- Trap/EventID
- 4354
- OMSA Event ID
- 2342
- OMSA Trap ID
- 120300
VDR53
- Message
- The consistency check logging of inconsistent parity data is disabled for arg1 .
- Arguments
- arg1 = virtual disk
- Detailed Description
- The consistency check can no longer report errors in the parity data.
- Recommended Response Action
- See the storage hardware documentation for more information on consistency check operation. Contact technical support.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 2 (Warning)
- Trap/EventID
- 4354
- OMSA Event ID
- 2343
- OMSA Trap ID
- 120300
VDR54
- Message
- arg1 initialization is terminated.
- Arguments
- arg1 = VD Name
- Detailed Description
- You have cancelled the virtual disk initialization.
- Recommended Response Action
- Restart the initialization.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 2 (Warning)
- Trap/EventID
- 4354
- OMSA Event ID
- 2344
- OMSA Trap ID
- 120300
VDR55
- Message
- arg1 initialization has failed.
- Arguments
- arg1 = VD Name
- Detailed Description
- The controller cannot communicate with attached devices. A disk may be removed or contain errors. Cables may also be loose or defective.
- Recommended Response Action
- Verify the health of attached devices. Review the Alert Log for significant events. Make sure the cables are attached securely. See the Cables Attached Correctly section for more information on checking the cables.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 4353
- OMSA Event ID
- 2345
- OMSA Trap ID
- 120400
VDR56
- Message
- Redundancy of arg1 has been degraded.
- Arguments
- arg1 = virtual disk
- Detailed Description
- This message occurs when a physical disk in the disk group was removed or when a physical disk included in a redundant virtual disk fails. Because the virtual disk is redundant (uses mirrored or parity information) and only one physical disk has failed, the virtual disk can be rebuilt. Typically, the virtual disk (E.g. RAID 6) has multiple redundant disks and there is a problem with one of them.
- Recommended Response Action
- Replace the missing or failed physical disk.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
VDR57
- Message
- Background Initialization in arg1 corrected medium error.
- Arguments
- arg1 = VD Name
- Detailed Description
- A disk media error was detected while the controller was completing a background task. A bad disk block was identified. The disk block has been remapped.
- Recommended Response Action
- Consider replacing the disk. If you receive this alert frequently, ensure to replace the disk. It is recommended to routinely back up your data.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
VDR58
- Message
- Bad block medium error is detected at block arg1 on arg2 .
- Arguments
- arg1 = args, arg2 = VD Name
- Detailed Description
- Virtual disk bad blocks are due to presence of unrecoverable bad blocks on one or more member physical disks.
- Recommended Response Action
- Recovering a physical disk bad block depends on the RAID level and state of the virtual disk. If a virtual disk is redundant, the controller can recover a bad block on a physical disk. If a virtual disk is not redundant, then the physical disk bad block results in a virtual disk bad block.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 4353
- OMSA Event ID
- 2387
- OMSA Trap ID
- 120400
VDR59
VDR6
- Message
- arg1 configuration has changed.
- Arguments
- arg1 = VD Name
- Detailed Description
- This alert is provided for informational purposes.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2055
- OMSA Trap ID
- 120100
VDR60
- Message
- arg1 initialization is in progress on arg2 .
- Arguments
- arg1 = initialization type, arg2 = virtual disk
- Detailed Description
- There are two modes of virtual disk initialization, full and fast. This initialisation type identified in the message is running on the virtual disk identified in the message.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
VDR7
- Message
- arg1 has failed.
- Arguments
- arg1 = virtual disk
- Detailed Description
- One or more physical disks included in the virtual disk have failed. If the virtual disk is non-redundant (does not use mirrored or parity data), then the failure of a single physical disk can cause the virtual disk to fail. If the virtual disk is redundant, then more physical disks have failed than you can rebuild using mirrored or parity information.
- Recommended Response Action
- Create a new virtual disk and restore from a backup.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 4353
- OMSA Event ID
- 2056
- OMSA Trap ID
- 120400
VDR8
- Message
- arg1 has become degraded.
- Arguments
- arg1 = virtual disk
- Detailed Description
- This message occurs when a physical disk in the disk group was removed or when a physical disk included in a redundant virtual disk fails. Because the virtual disk is redundant (uses mirrored or parity information) and only one physical disk has failed, the virtual disk can be rebuilt.
- Recommended Response Action
- Configure a hot spare for the virtual disk if it is not already configured. Rebuild the virtual disk. If a physical disk was removed from the disk group, either replace the disk or restore the original disk.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 2 (Warning)
- Trap/EventID
- 4354
- OMSA Event ID
- 2057
- OMSA Trap ID
- 120300
VDR9
- Message
- arg1 consistency check has started.
- Arguments
- arg1 = virtual disk
- Detailed Description
- A consistency check operation on a virtual disk has started.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2058
- OMSA Trap ID
- 120100
VDR91
- Message
- Consistency check for arg1 has detected multiple uncorrectable medium errors.
- Arguments
- arg1 = virtual disk
- Detailed Description
- This message occurs if there are medium errors in the physical drives.
- Recommended Response Action
- Replace the failed drives.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 4353
- OMSA Event ID
- 2396
- OMSA Trap ID
- 120400
VDR92
- Message
- Consistency check for arg1 has completed with uncorrectable errors.
- Arguments
- arg1 = virtual disk
- Detailed Description
- This message occurs if there are medium errors in the physical drives.
- Recommended Response Action
- Replace the failed drives.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 1 (Critical)
- Trap/EventID
- 4353
- OMSA Event ID
- 2397
- OMSA Trap ID
- 120400
VDR93
- Message
- arg1 bad block medium error is cleared.
- Arguments
- arg1 = VD Name
- Detailed Description
- This alert message occurs if there are medium errors in the physical drives.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2389
- OMSA Trap ID
- 120100
VDR94
- Message
- Controller preserved cache was recovered for arg1 .
- Arguments
- arg1 = virtual disk
- Detailed Description
- This message occurs if the controller pinned cache is recovered.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2381
- OMSA Trap ID
- 75100
VDR95
- Message
- Unable to log block arg1 .Bad block table on arg2 is full.
- Arguments
- arg1 = arg, arg2 = VD Name
- Detailed Description
- This alert message occurs if the virtual disk has bad blocks.
- Recommended Response Action
- Replace the disk in the Virtual disk, generating this alert and restore from backup. You may have lost data.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
VDR96
- Message
- Bad block table on arg1 is 80 percent full.
- Arguments
- arg1 = virtual disk
- Detailed Description
- This message occurs if the virtual disk has bad blocks.
- Recommended Response Action
- Replace the disk in the Virtual disk, generating this message.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
VDR97
- Message
- Patrol Read corrected a media error on arg1 .
- Arguments
- arg1 = VD Name
- Detailed Description
- The Patrol Read task has encountered an error such as a bad disk block and remapped data to correct the error.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
- OMSA Event ID
- 2271
- OMSA Trap ID
- 90100
VDR98
- Message
- arg1 has switched active controllers. Its active path is now through arg2 .
- Arguments
- arg1 = virtual disk, arg2 = controller name
- Detailed Description
- The virtual disk identified in the message has changed active paths. This can be because of an attempt to optimize the throughput of the system or it could be because of a controller failover.
- Recommended Response Action
- No response action is required.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 3 (Informational)
- Trap/EventID
- 4355
VDR99
- Message
- arg1 is unavailable because of an ID conflict in the fault-tolerant pair.
- Arguments
- arg1 = virtual disk
- Detailed Description
- The virtual disk identified in the message cannot be used because of an ID conflict with another virtual disk.
- Recommended Response Action
- Power cycle the system chassis to restore the virtual disk. If this does not correct the problem then contact your service provider.
- Category
- Storage (VDR = Virtual Disk)
- Severity
- Severity 2 (Warning)
- Trap/EventID
- 4354
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\