Dell Configuration Guide for the S4048–ON System 9.14.2.5

Displaying Information About Users Logged into the Switch

To display information on all users logged into the switch, using the show users command in EXEC Privilege mode. The output displays privilege level and/or user role. The mode is displayed at the start of the output and both the privilege and roles for all users is also displayed. If the role is not defined, the system displays "unassigned" .

DellEMC#show users
Authorization Mode:  role or privilege 

 Line         User    Role     Privilege Host(s) Location
 0 console 0  admin   sysadmin   15      idle    
*3 vty 1      sec1    secadmin   14      idle    172.31.1.4
 4 vty 2      ml1     netadmin   12      idle    172.31.1.5