Dell Command Line Reference Guide for the S4048–ON System 9.14.2.8

To disable debugging, use the no debug ip bgp [vrf vrf-name] [A.B.C.D | X:X:X:X::X | peer-group peer-group-name] notifications [in | out] command.

vrf vrf-name

(OPTIONAL) Enter the keyword vrf followed by the name of the VRF to view neighbor BGP notification information corresponding to that VRF.

A.B.C.D

(OPTIONAL) Enter the IPv4 address of the neighbor.

X:X:X:X::X

(OPTIONAL) Enter an IPv6 address.

peer-group peer-group-name

(OPTIONAL) Enter the keyword peer-group then the name of the peer group.

in

(OPTIONAL) Enter the keyword in to view BGP notifications received from neighbors.

out

(OPTIONAL) Enter the keyword out to view BGP notifications sent to neighbors

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide.

Version

Description

9.10(0.1)

Introduced on the S6010-ON and S4048T-ON.

9.10(0.0)

Introduced on the S3148.

9.10(0.0)

Introduced on the S6100-ON.

9.8(2.0)

Introduced on the S3100 series.

9.8(1.0)

Introduced on the Z9100–ON.

9.8(0.0P5)

Introduced on the S4048-ON.

9.8(0.0P2)

Introduced on the S3048-ON.

9.7(0.0)

Added ipv6 support.

9.0.2.0

Introduced on the S6000.

8.3.19.0

Introduced on the S4820T.

8.3.11.1

Introduced on the Z9000.

8.3.7.0

Introduced on the S4810.

7.8.1.0

Introduced on the S-Series.

7.7.1.0

Introduced on the C-Series.

To remove all configured debug commands for BGP, enter the no debug ip bgp command.