Dell Command Line Reference Guide for the S4048–ON System 9.14.2.8

To delete a match, use the no match ip route-source {prefix-list prefix-list-name} command.

prefix-list prefix-list-name

Enter the keywords prefix-list and then enter the name of configured prefix list, up to 140 characters.

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide.

Version

Description

9.10(0.1)

Introduced on the S6010-ON and S4048T-ON.

9.10(0.0)

Introduced on the S3148.

9.10(0.0)

Introduced on the S6100-ON.

9.8(2.0)

Introduced on the S3100 series.

9.8(1.0)

Introduced on the Z9100–ON.

9.8(0.0P5)

Introduced on the S4048-ON.

9.8(0.0P2)

Introduced on the S3048-ON.

9.7(0.0)

Introduced on the S6000–ON.

9.2(1.0)

Introduced on the Z9500.

9.0.2.0

Introduced on the S6000.

8.3.19.0

Introduced on the S4820T.

8.3.11.1

Introduced on the Z9000.

8.3.7.0

Introduced on the S4810

8.1.1.0

Introduced on the E-Series.

7.8.1.0

Increased the name string to accept up to 140 characters. Prior to 7.8.1.0, names were up to 16 characters long.

7.6.1.0

Introduced on the S-Series.

7.5.1.0

Introduced on the C-Series.

pre-6.1.1.0

Introduced on the E-Series.

• match interface — redistribute routes that match the next-hop interface.
• match ip address — redistribute routes that match an IP address.
• match ip next-hop — redistribute routes that match the next-hop IP address.
• match metric — redistribute routes that match a specific metric.
• match route-type — redistribute routes that match a route type.
• match tag — redistribute routes that match a specific tag.