Dell Command Line Reference Guide for the S4048–ON System 9.14.2.8

To disable redistribution, use the no redistribute isis [tag] [level-1 | level-1-2 | level-2] [metric metric-value | metric-type type-value] [route-map map-name] [tag tag-value] command.

tag

(OPTIONAL) Enter the name of the IS-IS routing process.

level-1

(OPTIONAL) Enter the keywords level-1 to redistribute only IS-IS Level-1 routes.

level-1-2

(OPTIONAL) Enter the keywords level-1-2 to redistribute both IS-IS Level-1 and Level-2 routes.

level-2

(OPTIONAL) Enter the keywords level-2 to redistribute only IS-IS Level-2 routes.

metric metric-value

(OPTIONAL) Enter the keyword metric then a number. The range is from 0 (zero) to 4294967295.

metric-type type-value

(OPTIONAL) Enter the keywords metric-type then one of the following:

• 1 = for OSPF External type 1
• 2 = for OSPF External type 2

route-map map-name

(OPTIONAL) Enter the keywords route-map then the name of the route map.

tag tag-value

(OPTIONAL) Enter the keyword tag to set the tag for routes redistributed into OSPF. The range is from 0 to 4294967295.

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide.

Version

Description

9.10(0.1)

Introduced on the S6010-ON and S4048T-ON.

9.10(0.0)

Introduced on the S3148.

9.10(0.0)

Introduced on the S6100-ON.

9.8(2.0)

Introduced on the S3100 series.

9.8(1.0)

Introduced on the Z9100-ON.

9.8(0.0P5)

Introduced on the S4048-ON.

9.8(0.0P2)

Introduced on the S3048-ON.

9.7(0.0)

Introduced on the S6000-ON.

9.2(1.0)

Introduced on the Z9500.

9.0.2.0

Introduced on the S6000.

8.3.19.0

Introduced on the S4820T.

8.3.11.1

Introduced on the Z9000.

8.3.7.0

Introduced on the S4810.

7.8.1.0

Added support for Multi-Process OSPF.

7.5.1.0

Introduced on the C-Series.

pre- 6.1.1.1

Introduced on the E-Series.