Dell Command Line Reference Guide for the S4048–ON System 9.14.2.8

policy policy-name

Enter the keyword policy then the policy name. The policy name allows a maximum of 140 characters.

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide.

Version

Description

9.11(0.0)

Introduced on the C9010.

9.10(0.1)

Introduced on the S6010-ON and S4048T-ON.

9.10(0.0)

Introduced on the S3148.

9.10(0.0)

Introduced on the S6100-ON.

9.9(0.0)

Introduced on the Z9500.

9.8(2.0)

Introduced on the S3100 series.

9.8(1.0)

Introduced on the Z9100-ON.

9.8(0.0P5)

Introduced on the S4048-ON.

9.8(0.0P2)

Introduced on the S3048-ON.

9.7(0.0)

Introduced on the S4810, S4820T, S5000, S6000, Introduced on the S6000–ON, and Z9000 switches.

DellEMC# show ipv6 nd ra-guard policy test

ipv6 nd ra-guard policy test
  device-role router
  hop-limit maximum    1
  match  ra  ipv6-access-list  access
  other-config-flag on
  router-preference maximum medium
  trusted-port
  Interfaces :
  Te 1/1
DellEMC#

• ipv6 nd ra-guard enable — configure the RA guard related commands.

• ipv6 nd ra-guard policy — define the RA guard policy name and enter the RA guard policy list configuration mode.

• device-role — specify the role of the device attached to the port.

• hop-limit — enable the verification of the advertised hop count limit.

• mtu — set the maximum transmission unit (MTU) value.

• other-config-flag — enable the verification of the advertised other configuration parameter.

• reachable-time — set the advertised reachability time.

• retrans-timer — set the advertised retransmission time.

• router-preference maximum — enable the verification of the advertised default router preference (DRP) value.

• trusted-port — apply the policy to trusted ports.

• ipv6 nd raguard attach-policy — apply the IPv6 RA guard to a specific interface.