Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products

Dell G5 SE 5505 Service Manual

Installing the display assembly

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following image indicates the location of the display assembly and provides a visual representation of the installation procedure.

Image: Installing the batteryImage: Installing the battery

Steps

  1. Align the display assembly on the palm-rest and keyboard assembly.
  2. Align the screw holes on the display hinges with screw holes on the system board.
  3. Replace the four screws (M2.5x5) that secure the display hinges to the system board.
  4. Connect the display cable from the system board.

Next steps

  1. Install the heat sink.
  2. Install the base cover.
  3. Follow the procedure in After working inside your computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\