PowerScale OneFS Web Administration Guide

Add or remove an IP address range per subnet

You can add or remove an IP address range within a subnet.

1. Click Cluster Management > Network Configuration > External Network.
2. Click View/Edit next to the subnet that you want to modify.
   The system displays the View subnet details window.
3. Click Edit.
   The system displays the Edit subnet details window.
4. To add a range, in the SmartConnect service IPs area, enter a range of IP addresses you want to assign to the subnet.
   Specify the range in the following format: low IP address - high IP address
   If you want to use a single IP address, enter the same IP address into both fields.
5. To add another range, click Add an IP range.
   The system provides fields in which you can enter the low and high IP addresses of the additional range.
6. To delete an IP address range, click Remove IP range next to the range you want to delete.
7. Click Save Changes.