Installing heat sink assembly
Heat sink assembly consists of heat sink and the system fan.
-
Align the heat sink assembly with screw holders on the system board
.
-
Tighten the M2.0 x 3.0 screws to secure the heat sink to the system board.
NOTE Tighten the screws in the order of the callout numbers [1, 2, 3, 4] as indicated on the heat sink.
-
Tighten the M2.0 x 5.0 screws to secure the fan to the system board.
-
Connect the fan cable to the connector on the system board.
-
Follow the procedure in
After working inside your computer.
Data is not available for the Topic