Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Latitude 5520 Service Manual

Installing the smart card reader

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following image indicates the location of the smart card reader and provides a visual representation of the installation procedure.

Smart card reader

Steps

  1. Align and place the smart card reader on the palm-rest assembly.
  2. Replace the two screws (M2x3) that secure the smart card reader to the palm-rest assembly.
  3. Connect the smart card reader cable to the connector on the USH board.

Next steps

  1. Install the assembly inner frame.
  2. Install the battery.
  3. Install the WWAN card.
  4. Install the WLAN card.
  5. Install the base cover.
  6. Install the microSD card.
  7. Install the SIM card.
  8. Follow the procedure in After working inside your computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\