OptiPlex 7060 Tower Service Manual

Removing system board

1. Follow the procedure in Before working inside your computer.
2. Remove the:
   1. Side cover
   2. Front bezel
3. Open the front panel door.
4. Remove the:
   1. Heatsink fan
   2. Heatsink
   3. Processor
   4. Expansion card
   5. PCIe SSD
   6. SD card reader
   7. Memory module
5. Disconnect the following cables from the system board:
   1. CPU power [1]
   2. Hard drive data and optical drive data [2]
   3. Speaker [3]
   4. System power [4]
   5. SATA [5]
      
6. To remove the system board:
   1. Remove the screws that secure the system board to the computer [1].
      
   2. Slide and lift the system board away from the computer [1, 2].