Dell OptiPlex 9020M Owner's Manual

Installing the Dell OptiPlex Micro VESA Mount

Recommended Screws:

	Screw Type	Used in
	M4 x L10 mm, Pan head screw	Monitor
	ST4 x L13 mm, Wooden screw	Wooden table

Prerequisite: Install the power adapter.

1. Perform the following steps as shown in the illustration:
   1. Tighten the screws to secure the VESA mount to the table.
   2. Slide the computer into the VESA mount [1].
   3. Tighten the screw to secure the computer to the VESA mount [2].
   
2. Perform the following steps as shown in the illustration:
   1. Slide the power adapter case through the grooves at the bottom of the VESA mount to lock it.
   2. Connect all the cables and install antenna to the computer.