Dell PowerEdge RAID Controller 9 User’s Guide H330, H730, and H830

Updating PERC 9 driver for existing Windows Server 2008 R2 and newer

1. Insert the media (CD, DVD, or USB drive) containing the driver.
2. Select Start > Settings > Control Panel > System.
   The System Properties screen is displayed.

   NOTE:The path to System might vary depending on the operating system family.
3. Click on the Hardware tab.
4. Click Device Manager.
   The Device Manager screen is displayed.

   NOTE:The path to Device Manager might vary depending on the operating system family.
5. Expand SCSI and RAID Controllers by double-clicking the entry or by clicking on the plus symbol next to SCSI and RAID Controller.
   NOTE:In Windows Server 2008, Windows Server 2008 R2, and Windows Server 2012, the PERC 9 series of cards are listed under Storage Controllers.
6. Double-click the RAID controller for which you want to update the driver.
7. Click the Driver tab and click Update Driver.
   The screen to update the device driver wizard is displayed.
8. Select Install from a list or specific location.
9. Click Next.
10. Follow the steps in the wizard and browse to the location of the driver files.
11. Select the INF file from the driver media (CD, DVD, or other media).
12. Click Next and continue the installation steps in the wizard.
13. Click Finish to exit the wizard and reboot the system for the changes to take place.
    NOTE:Dell provides the Dell Update Package (DUP) to update drivers on systems running Windows Server 2008 R2 and newer operating system. DUP is an executable application that updates drivers for specific devices. DUP supports command line interface and silent execution. For more information, see Dell.com/support/home.