- Notes, cautions, and warnings
- Dell EMC PowerEdge FC640 system overview
- Documentation resources
- Technical specifications
- Initial system setup and configuration
- Pre-operating system management applications
- Options to manage the pre-operating system applications
- System Setup
- Viewing System Setup
- System Setup details
- System BIOS
- Viewing System BIOS
- System BIOS Settings details
- System Information
- Viewing System Information
- System Information details
- Memory Settings
- Viewing Memory Settings
- Memory Settings details
- Processor Settings
- Viewing Processor Settings
- Processor Settings details
- SATA Settings
- Viewing SATA Settings
- SATA Settings details
- NVMe Settings
- Viewing NVMe Settings
- NVMe Settings details
- Boot Settings
- Viewing Boot Settings
- Boot Settings details
- Choosing system boot mode
- Changing boot order
- Network Settings
- Viewing Network Settings
- Network Settings screen details
- Integrated Devices
- Viewing Integrated Devices
- Integrated Devices details
- Serial Communication
- Viewing Serial Communication
- Serial Communication details
- System Profile Settings
- Viewing System Profile Settings
- System Profile Settings details
- System Security
- Viewing System Security
- System Security Settings details
- Creating a system and setup password
- Using your system password to secure the system
- Deleting or changing system and setup password
- Operating with setup password enabled
- Redundant OS Control
- Viewing Redundant OS Control
- Redundant OS Control screen details
- Miscellaneous Settings
- Viewing Miscellaneous Settings
- Miscellaneous Settings details
- iDRAC Settings utility
- Device Settings
- Dell Lifecycle Controller
- Boot Manager
- PXE boot
- Installing and removing system components
- Safety instructions
- Before working inside your system
- After working inside your system
- Recommended tools
- Removing the system from the enclosure
- Installing the system into the enclosure
- Inside the system
- Air shroud
- Drives
- Drive backplane
- System memory
- Processors and heat sinks
- M.2 SSD module
- Network Daughter Card
- Mezzanine card
- Storage controller card
- System battery
- Optional internal USB memory key
- Optional MicroSD or vFlash card
- IDSDM
- System board
- Trusted Platform Module
- rSPI card
- System diagnostics
- Jumpers and connectors
- Getting help
Dell EMC PowerEdge FC640 Installation and Service Manual
Miscellaneous Settings details
About this task
- Option
- Description
- System Time
- Enables you to set the time on the system.
- System Date
- Enables you to set the date on the system.
- Asset Tag
- Specifies the asset tag and enables you to modify it for security and tracking purposes.
- Keyboard NumLock
- Enables you to set whether the system should boot with the
NumLock enabled or disabled. This option is set to On by default.NOTE: This option does not apply to 84-key keyboards.
- F1/F2 Prompt on Error
- Enables or disables the F1/F2 prompt on error. This option is set to Enabled by default. The F1/F2 prompt also includes keyboard errors.
- Load Legacy Video Option ROM
- Enables you to determine whether the system BIOS loads the legacy video (INT 10H) option ROM from the video controller. Selecting Enabled in the operating system does not support UEFI video output standards. This field is available only for UEFI boot mode. You cannot set the option to Enabled if UEFI Secure Boot mode is enabled. This option is set to Disabled by default.
- Dell Wyse P25/P45 BIOS Access
- Enables or disables the Dell Wyse P25/P45 BIOS Access. This option is set to Enabled by default.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\