Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell EMC PowerEdge MX740c Installation and Service Manual

PDF

Removing the PERC card

Prerequisites

  1. Follow the safety guidelines listed in Safety Instructions.
  2. Follow the procedure listed in Before working inside the sled.
  3. Disconnect the cable connected to the PERC card.

Steps

  1. Pull the blue pull tag to raise the lever up on the PERC card.
    NOTE For the H730P MX(non-RAID) card, pull the two blue pull tags to raise the lever up. Rest of the procedure to remove the PERC card remains identical to HBA330 MX (non-RAID) card.
    NOTE The MX740c supports both HBA330 MX or H730P MX PERC card.
  2. Holding the blue pull tag, lift the PERC card away from the system.
    Figure 1. Removing the PERC card (HBA330)
    This image shows how to remove the PERC card.

Next steps

  1. Follow the procedure listed in After working inside your sled.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\